INSTALLATION INSTRUCTIONS USER GUIDE Touch control ceramic glass cooktops CE604DTB, CE704DTB and CE754DTB models NZ AU
CONTENTS Safety and warnings 2 Installation instructions 8 Introduction 14 Using your cooktop 16 Using your cooktop’s special features 20 Cooking guidelines 25 Care and cleaning 28 Troubleshooting 30 Warranty and service 32 IMPORTANT! SAVE THESE INSTRUCTIONS The models shown in this user guide may not be available in all markets and are subject to change at any time. For current details about model and specification availability in your country, please go to our website www.fisherpaykel.
SAFETY AND WARNINGS Your safety is important to us. Please read this information before using your cooktop. Installation WARNING! Electrical Shock Hazard Disconnect the appliance from the mains electricity supply before carrying out any work or maintenance on it. Connection to a good earth wiring system is essential and mandatory. Alterations to the domestic wiring system must only be made by a qualified electrician. Failure to follow this advice may result in electrical shock or death.
SAFETY AND WARNINGS IMPORTANT SAFETY INSTRUCTIONS Installation ● ● ● ● ● ● ● Read these instructions carefully before installing or using this appliance. No combustible material or products should be placed on this appliance at any time. Please make this information available to the person responsible for installing the appliance as it could reduce your installation costs. In order to avoid a hazard, this appliance must be installed according to these instructions for installation.
SAFETY AND WARNINGS Operation and maintenance WARNING! Electrical Shock Hazard Do not cook on a broken or cracked cooktop. If the cooktop surface should break or crack, switch the appliance off immediately at the mains power supply (wall switch) and contact a qualified technician. Switch the cooktop off at the wall before cleaning or maintenance. Failure to follow this advice may result in electrical shock or death.
SAFETY AND WARNINGS WARNING! Hot Surface Hazard During use, accessible parts of this appliance will become hot enough to cause burns. Do not let body, clothing or any item other than suitable cookware contact with the ceramic glass until the surface is cool. Never leave metal objects on the cooktop as they can become hot very quickly. Keep children away. Handles of saucepans may be hot to touch. Check saucepan handles do not overhang other cooking zones that are on. Keep handles out of reach of children.
SAFETY AND WARNINGS Operation and maintenance IMPORTANT SAFETY INSTRUCTIONS ● ● ● ● ● ● ● ● ● 6 CAUTION: The cooking process has to be supervised. A short term cooking process has to be supervised continuously. Never leave the appliance unattended when in use. Boilover causes smoking and greasy spillovers that may ignite. Never use your appliance as a work or storage surface. Never leave any objects or utensils other than suitable cookware on the appliance.
SAFETY AND WARNINGS IMPORTANT SAFETY INSTRUCTIONS ● ● ● ● ● ● ● ● ● ● This appliance can be used by children aged from 8 years and above, and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge, if they have been given supervision or instruction concerning the use of the appliance in a safe way and they understand the hazards involved. Cleaning and user maintenance shall not be done by children without supervision.
INSTALLATION INSTRUCTIONS Cooktop and cutout dimensions Drawings for illustration purposes only X C A B CI E D G F X Terminal block location: Electrical connection is made at the middle rear CE754DTB CE704DTB MM MM MM A Overall width of cooktop 600 700 750 B Overall depth of cooktop 530 530 530 C Height of chassis (below top of bench) 48 48 48 C Height of terminal block (below top of bench) 58 58 58 D Width of chassis 552 552 715 E Depth of chassis 480 480 480 F
INSTALLATION INSTRUCTIONS Clearances Drawings for illustration purposes only A D B C E C CE604DTB CE704DTB CE754DTB CLEARANCE DIMENSIONS MM MM MM 55 55 55 650 650 650 A Minimum clearance from rear edge of cutout to: nearest combustible surface B Minimum clearance from glass surface to: rangehood C Minimum clearance from side edges of cutout to: nearest combustible surface 85 135 78 D Minimum clearance from benchtop to: overhead cabinet not directly above the cooktop 450 450 4
INSTALLATION INSTRUCTIONS Before you install the cooktop, make sure that ● ● ● ● ● ● ● ● the benchtop is square and level, and no structural members interfere with space requirements the benchtop is made of a heat-resistant material the cooktop will not be installed directly above a dishwasher, as the humidity may damage the cooktop the installation will comply with all clearance requirements and applicable standards and regulations a suitable isolating switch providing full disconnection from the main
INSTALLATION INSTRUCTIONS Fastening the cooktop to the bench 1 Turn the cooktop upside down and place it on a soft surface. 2 Spread the seal around the edges of the ceramic glass with the adhesive side facing down, making sure that the whole perimeter is sealed. Cut off any excess material. 3 Mount the supplied clamps (A) and screws (B) onto the cooktop, as shown (without tightening the screws). 4 Place the cooktop into the cutout, then tighten the screws to clamp the cooktop securely to the bench.
INSTALLATION INSTRUCTIONS Connecting the cooktop to the mains power supply IMPORTANT! ● ● ● ● ● This cooktop must be connected to the mains power supply only by a suitably qualified person. This cooktop must be earthed.
INSTALLATION INSTRUCTIONS TO BE COMPLETED BY THE INSTALLER Is the cooktop earthed? Check that the power supply cable is NOT touching the base of the cooktop. This will ensure that the cable is not damaged by heat from the cooktop. Check that the power supply cable is not accessible via cupboard doors or drawers. Is the cooktop clamped down securely? Check that all the cooking zones function correctly. Turn on all of them to a high setting and leave them on for at least one minute.
INTRODUCTION About your new cooktop Thank you for buying a Fisher & Paykel ceramic glass cooktop. This guide introduces you to all its special features. We recommend you read the whole guide before using your new cooktop, for both safety and cooking success. For more information, visit our website listed on the back cover. Before using your new cooktop ● ● Read this user guide, taking special note of the ‘Safety and warnings’ section. Remove any protective film that may still be on your cooktop.
INTRODUCTION Touch controls overview These indicators show which cooking zone(s) the timer is set for: if flashing: timer is selected and ready to be set if steadily lit: timer is set and counting down if flashing and beeping: set time is up Timer display: - shows the number of minutes set/ remaining - shows CL (cleared) if the timer is not set if on: outer section of the dual cooking zone is on if off: outer section of the dual cooking zone is off if on: controls (except ON/ OFF) are locked and unrespo
USING YOUR COOKTOP Using the touch controls ● ● ● The cooking zone and timer displays also function as touch controls. To select a cooking zone or the timer, simply touch its display. Use the ball of your finger, not its tip. The controls respond to touch, so you don’t need to apply any pressure. Once you have selected a cooking zone or the timer, you have 10 seconds to set it (while the little red light at the bottom right of the display is on).
USING YOUR COOKTOP To start cooking 1 Turn on the cooktop. Notes: ● CL (cleared) in the timer display means that the timer is not set. ● If you do not select a cooking zone within 20 seconds, the cooktop will automatically turn off. 2 Select a cooking zone. 3 Select a heat setting (0-9). Note: setting u (between 0 and 1) provides continuous gentle heat between See ‘Using your cooktop’s special features’. 0 and 1.
USING YOUR COOKTOP To modify the heat setting during cooking 2 Modify its heat setting. 1 Select a cooking zone. When you have finished using a cooking zone, you can turn it off, but continue to use other cooking zones: 2 Decrease its heat setting until the display shows 0. If the cooking zone surface is too hot to touch, H will replace 0 in the display. 1 Select the cooking zone you want to turn off. turn the whole cooktop off: 1 Turn the cooktop off.
USING YOUR COOKTOP Using the dual (right rear) cooking zone When you turn the dual (right rear) cooking zone on, both the inner and outer sections control to toggle the outer section off or on again. will heat. Use the outer section ON outer section OFF Locking the controls ● ● You can lock the controls to prevent unintended use (for example children accidentally turning cooking zones on). When the controls are locked, all controls except the ON/OFF control are disabled.
USING YOUR COOKTOP’S SPECIAL FEATURES Using the Auto Heat-reduce feature ● ● Cooking zones set for this feature will: first quickly heat up food or liquid at the highest setting then automatically reduce the heat to a preset lower setting to cook the food through. To set a cooking zone for Auto Heat-reduce 9. 1 Select a cooking zone. 2 Select heat setting 3 Re-touch the right end of the setting selector. A will start flashing alternately with 9 in the cooking zone’s display.
USING YOUR COOKTOP’S SPECIAL FEATURES PRESET LOWER HEAT SETTING PERIOD ON HIGHEST SETTING 1 1 minute 2 3 minutes 3 5 minutes 4 6.5 minutes 5 8.5 minutes 6 2.5 minutes 7 3.5 minutes 8 4.5 minutes To increase or quit the Auto Heat-reduce setting while Ais flashing 1 Select the cooking zone already set for Auto Heat-reduce. 2 Increase the lower heat setting. The period on highest setting will be automatically readjusted. 2 To quit, decrease the lower heat setting.
USING YOUR COOKTOP’S SPECIAL FEATURES Using the GentleHeat feature ● ● ● ● This heat setting between 0 and 1 provides continuous gentle heat and is ideal for: delicate cooking tasks such as melting chocolate warming plates keeping cooked food warm. If reheating cooked food from cold, always bring it to the boil on a higher setting before changing to the GentleHeat setting. For food safety reasons, a cooking zone set for GentleHeat will automatically turn off after two hours of continuous use.
USING YOUR COOKTOP’S SPECIAL FEATURES Using the timer You can set the timer to automatically turn one or more cooking zones off when the set time is up. IMPORTANT! Never leave the cooktop unattended when in use, even if you have set the timer to automatically turn a cooking zone off. To set the timer for a cooking zone 1 Select a cooking zone already in use. 2 Select the timer. 3 The flashing indicator in the timer display means that the timer is ready to be set for the left rear cooking zone.
USING YOUR COOKTOP’S SPECIAL FEATURES 5 The display will then indicate for you to set the left-hand digit. 6 Set the left-hand digit using the setting selector. The timer is now set and begins counting down. When the set time is up ● ● ● ● ● 24 The corresponding indicator in the timer display will flash, the timer will beep, and the cooking zone will automatically turn off (its display showing H if the surface is hot). Touch any control to stop the beeping.
COOKING GUIDELINES Cookware ● ● ● ● ● ● ● ● Use heavy-gauge, flat, smooth-based cookware that matches the diameter of the cooking zone. This will provide good contact with the glass and help reduce cooking times. Low heat or slow cooking is often due to incorrect cookware size. Cookware with a stainless steel sandwich base or enamelled cast iron will give you the best results. Saucepans or heavy frying pans with jagged edges or a rough base will scratch the glass.
COOKING GUIDELINES IMPORTANT! ● ● ● ● ● ● ● ● Never leave the appliance unattended when in use. Boilover causes smoking and greasy spillovers that may ignite. Take care when deep-frying: oil or fat can overheat very quickly, particularly on a high setting. General cooking tips Using a lid will reduce cooking times through retaining the heat. Minimise the amount of liquid or fat to reduce cooking times. Start cooking on a high setting and reduce it when the food has come to the boil or heated through.
Percentage of power % 0 U 1 2 3 4 5 6 7 8 Maximum heat Boiling, sautéing and searing Reheating and rapid simmering Gentle simmering, slow warming Deilcate warming for small amounts of food or foods that burn quickly COOKING GUIDELINES Heat settings 100 80 60 40 20 9 Heat setting 27
CARE AND CLEANING IMPORTANT! ● ● ● For your safety, switch the power to the cooktop off at the wall before any cleaning. In this case, there will be no ‘Hot surface’ indication, but the cooking zones may still be hot! Take extreme care. Do not use a steam cleaner to clean your cooktop. Do not use scourers or any harsh/abrasive cleaning agents to clean your cooktop, as these can scratch the ceramic glass or stainless steel.
CARE AND CLEANING WHAT? HOW? Metallic stains on glass caused by cookware with ● ● - copper base - aluminium base Spillover on the touch controls - food stains - fingerprints and marks Follow the instructions for ‘Non-sugary boilovers, spills and food stains on glass’ above. For stubborn metallic stains, try using a razor blade scraper suitable for ceramic glass cooktops, holding it at a 30o angle. 1 Switch the power to the cooktop off at the wall. 2 Soak up the spill.
TROUBLESHOOTING PROBLEM POSSIBLE CAUSE WHAT TO DO The cooktop cannot be turned on. No power. Make sure the cooktop is connected to the power supply and that it is switched on at the wall. Check whether there is a power outage in your home or area. If you’ve checked everything and the problem persists, call your Authorised Repairer or Customer Care. Cooking zones seem to turn themselves off and on during use.
TROUBLESHOOTING PROBLEM POSSIBLE CAUSES WHAT TO DO The cooktop turns itself off unexpectedly and the cooking zone displays read out Er21 alternating with H. The cookop electronics have overheated and the cooktop turns itself off as a safety measure. Let the cooktop cool down before using it again. The cooktop turns itself off unexpectedly and no error message or hot surface indication is displayed. There is a power outage in your home or area. Wait until the power comes back on.
WARRANTY AND SERVICE Before you call for service or assistance ... Check the things you can do yourself. Refer to the installation instructions and your user guide and check that: 1 Your product is correctly installed. 2 You are familiar with its normal operation. If after checking these points you still need assistance or parts, please refer to the Service & Warranty book for warranty details and your nearest Authorised Service Centre, Customer Care, or contact us through our website www.fisherpaykel.com.
WARRANTY AND SERVICE This cooktop has been designed and constructed in accordance with the following codes and specifications: ● ● ● In New Zealand and Australia: AS/NZS 60335-1:Current Version General Requirements for Domestic electrical appliances AS/NZS 60335-2-6:Current Version Particular Requirements for Domestic electrical cooking appliances AS/NZS CISPR 14.1.Current Version Electromagnetic Compatibility Requirements.
www.fisherpaykel.com Copyright © Fisher & Paykel Appliances 2016 All rights reserved. The product specifications in this booklet apply to the specific products and models described at the date of issue. Under our policy of continuous product improvement, these specifications may change at any time. You should therefore check with your Dealer to ensure this booklet correctly describes the product currently available. NZ AU 599581 C / 1103203-ß3 11.
