User Manual

43
TROUBLESHOOTING
PROBLEM POSSIBLE CAUSES WHAT TO DO
Self Clean function
Double oven models
only:
I cannot select the Self
clean function.
One oven is already turned on
or set for automatic cooking.
You cannot start a Self
Clean cycle when one oven
already has a function
selected.
Turn the function knob to
Off and try again.
I have cancelled a Self
Clean cycle but cannot
use the oven:

the oven door will
not open

the display is still
counting down
minutes or showing
0h 00m

COOLING is showing
in the display

the knobs and
buttons are
unresponsive.
This is normal: if COOLING is
showing in the display,, you
have successfully cancelled the
Self Clean cycle. However, the
oven is still too hot to be
used for cooking and
needs to cool down.
Wait until the cool-down
phase has finished. A
long tone will sound
and the oven door will
automatically unlock when
the oven is ready to use.
Note: depending on when
the Self Clean cycle was
cancelled, the cool-down
phase may take up to 45
minutes.
The oven is beeping and
the display shows A2
or A3.
See section ‘Alert codes’ for instructions.
There is a power cut
during a Self Clean
cycle.
Power cut. The door will remain
locked. Once the power is
turned back on, the door
will remain locked until the
oven has cooled to a safe
temperature.