Quick Start Guide

591009A 02.16
USING THE TIMER
FOR MORE INFORMATION
REPOSITIONING THE SHELVES
CONDITION THE OVEN
(CONTINUED)
For detailed information on the
features of your oven
For warranty information
If you…

have any questions or comments

need a DCS by Fisher & Paykel authorized
technician to service your product

need replacement parts or accessories

want to register your product
see your ‘User guide’
see your ‘Service and warranty’ booklet
see your ‘Service and warranty’ booklet or contact us
USA toll-free, 24/7 1 888 936 7872
CA toll-free, 24/7 1 888 936 7872
www.dcsappliances.com
Placing the telescopic sliding shelves on the side racks provides EIGHT cooking
positions to choose from. Refer to the User guide for suggested shelf positions.
Note: generally, the shelf positions in the top of the oven are suitable for broiling.
Those in the middle or lower region of the oven are suitable for baking, roasting and casseroles.

Always position oven shelves BEFORE heating the oven.

To remove a sliding shelf, grip it by its two front corners (making sure you are gripping the wire shelf
and the sliding frame together), tilt upwards and pull it out of the oven.

To place a sliding shelf in the oven correctly, position it so that the front bar is toward you, as shown.

Check that the sliding frame is not extended.

Check the guard rail (as shown) to make sure the shelf is the right way up.

Position the shelf so that it is level and the rear shelf tags on both sides of the sliding frame rest on the
side racks (as shown).

Then push the sliding shelf all the way to the back of the oven, until the front shelf tags drop into
place.

For your safety, the wire shelves and telescopic sliding frames are built together as one unit and are
not separable. This means that when placed properly on the side racks, the slides will prevent the wire
shelves from tilting when pulled towards you.

To prevent the tags from lifting off the side racks, take care to slide the shelves forward horizontally.
Shelf positions
1
2
3
4
5
6
7
8
Side rack
Side rack
Mounting
slots
Retaining wire
Lock
stud
Wire shelf
Front bar
Sliding frame
(push fully into place)
Shelf tag
Guard rail

You can use the timer at any time, even if you are not using the oven.

If the time is more than an hour, the display will count down in minutes ( h :m). If it is less than an hour, it will count down in seconds
( m :s ).

You can set the timer for up to 23 hours 59 minutes.
IMPORTANT!
The timer does NOT turn the oven off.
To set the timer

There will be a distinctive smell and a small amount of smoke during the conditioning of the oven.
This is normal, but make sure the kitchen is well ventilated during the conditioning.

Once cooled, wipe out the oven with a damp cloth and mild detergent, and dry thoroughly.
6 After 30 minutes is up, select the
CONV BROIL function.

The oven heats at the CONV BROIL
preset temperature of 350f.
7 Set the temperature to 400
o
F for 5
minutes.

The halos will remain orange.

The temperature display may show the
actual and set temperatures.
8 After 5 minutes is up, turn the oven
function knob counter clockwise
back to OFF.

both halos will go out.
SET TIME 31 :4 5 pm pm pm
0 : 0 0 PM
SET TIME 0 : 00SET TIME
SET TIME
24h SET TIME 2 :0 0SET TIME SET TIME 2 : 1 5
BAKE 350f
2 : 1 5 PM
14 : 1 5
14 : 45
14 : 1 5 14 : 1 5 14 : 1 5
CONV BROIL 400f
BAKE 400f BAKE 400fBAKE 400f51 1
1 : 1 5
SET TIME 31 :4 5 pm pm pm
0 : 0 0 PM
SET TIME 0 : 00SET TIME
SET TIME
24h SET TIME 2 :0 0SET TIME SET TIME 2 : 1 5
BAKE 350f
2 : 1 5 PM
14 : 1 5
14 : 45
14 : 1 5 14 : 1 5 14 : 1 5
CONV BROIL 400f
BAKE 400f BAKE 400fBAKE 400f51 1
1 : 1 5
SET TIME 31 :4 5 pm pm pm
0 : 0 0 PM
SET TIME 0 : 00SET TIME
SET TIME
24h SET TIME 2 :0 0SET TIME SET TIME 2 : 1 5
BAKE 350f
2 : 1 5 PM
14 : 1 5
14 : 45
14 : 1 5 14 : 1 5 14 : 1 5
CONV BROIL 400f
BAKE 400f BAKE 400fBAKE 400f51 1
1 : 1 5
1 Press TIMER. 0h 00m will flash in the
display to indicate the timer is ready
to be set.
Adjusting the timer setting is the same process as setting a new timer.
1 Press TIMER. The previous timer setting will flash in the display.
2 Press PLUS or MINUS to modify the length of the timer.
2 Press ACCEPT to confirm. The timer is now set and will begin counting down.
1 Press TIMER.
2 Press and hold CANCEL to clear the timer setting.
1 The timer will show 00m. A tone will sound.
2 Press ACCEPT or CANCEL to stop the tone sounding.
To modify the timer setting
To cancel the timer setting
When the set time is up
2 Press PLUS or MINUS to adjust the
length of the timer.

Holding the buttons down will speed
up the time adjustments.
3 Press ACCEPT to confirm. The timer is
now set and will begin counting down.

The display will revert automatically
to the home screen, with the Timer
setting in the top left screen.
SET TIME 0 :0 0 PM
0 :0 0 PM
SET TIME 0 :0 0 PM
SET TIME
:
SET TIME 2 :0 0 PMSET TIME SET TIME 2 : 1 5 PM
BAKE 360
F
2 : 1 5
2 : 1 5
CONV BROIL 400
F
2 : 45
BAKE 400
F
2 : 1 5
BAKE 400
F
2 : 1 5
BAKE 40051 1
F
2 : 1 5
1 : 1 5
TIMER 0h 00m
:
TIMER 0h 30m
1 : 1 5
1 : 1 5
:
TIMER 2h 45m
1 : 1 5
:
TIMER 2h 45m
1 : 1 5
SET TIME 0 :0 0 PM
0 :0 0 PM
SET TIME 0 :0 0 PM
SET TIME
:
SET TIME 2 :0 0 PMSET TIME SET TIME 2 : 1 5 PM
BAKE 360
F
2 : 1 5
2 : 1 5
CONV BROIL 400
F
2 : 45
BAKE 400
F
2 : 1 5
BAKE 400
F
2 : 1 5
BAKE 40051 1
F
2 : 1 5
1 : 1 5
TIMER 0h 00m
:
TIMER 0h 30m
1 : 1 5
1 : 1 5
:
TIMER 2h 45m
1 : 1 5
:
TIMER 2h 45m
1 : 1 5
SET TIME 0 :0 0 PM
0 :0 0 PM
SET TIME 0 :0 0 PM
SET TIME
:
SET TIME 2 :0 0 PMSET TIME SET TIME 2 : 1 5 PM
BAKE 360
F
2 : 1 5
2 : 1 5
CONV BROIL 400
F
2 : 45
BAKE 400
F
2 : 1 5
BAKE 400
F
2 : 1 5
BAKE 40051 1
F
2 : 1 5
1 : 1 5
TIMER 0h 00m
:
TIMER 0h 30m
1 : 1 5 1 : 1 5
:
TIMER 2h 45m
1 : 1 5
:
TIMER 2h 45m
1 : 1 5
SET TIME 0 :0 0 PM
0 : 0 0 PM
SET TIME 0 :0 0 PMSET TIME
SET TIME
24 : HR SET TIME 2 :0 0 PMSET TIME SET TIME 2 : 1 5 PM
BAKE
350f
350f
2 : 1 5
14 : 1 5
14 : 1 5 14 : 1 5
14 : 45
14 : 45
14 : 45 14 : 45 14 : 45
14 : 45
CONV BROIL 400f
BAKE 400f BAKE 400fBAKE 400f51 1
1 : 1 5
BAKE
400f115
400f355
BAKE
400f
CONV BROIL
CONV BROIL
350