Quick Start Guide
Table Of Contents
- 1 Safety and warnings
- 2 Integrated columns
- 3 Components list
- 4 Product dimensions and specifications
- 5 Cabinetry options
- 6 Cavity dimensions
- 7 Door and toe kick panel dimensions
- 8 Custom door panel dimensions
- 9 Door opening rotation
- 10 Electrical and plumbing
- 11 Before installation
- 12 Unpacking and moving your product
- 13 Attach the anti-tip bracket
- 14 Connect to water and power supply
- 15 Single installation
- 16 Dual installation
- 17 Install water filter
- 18 Install brackets to door panel (Stainless steel)
- 19 Install brackets to door panel (Custom)
- 20 Install door panels
- 21 Install toe kick
- 22 Install kickstrip grille
- 23 Install cabinet trims
- 24 Install flow divider and door trims
- 25 Optional — Changing over door hinges
- 26 Final checklist
40
Removing the door
1 Release the hinge spring by turning the star T20 screws in the hinge to the “0” position (A).
@5OPTIONAL—CHANGING OVER DOOR HINGES
You have the option to change the door hinge side of your appliance from right hand
hinge to left hand hinge or vice versa. A hinge change kit is required for this installation.
IMPORTANT!
Ensure that you remove all the shelves, covers and trims from the appliance before
changing the hinges. Take care not to damage the door. We recommend to lay the
appliance (door closed) onto its back on the pallet when removing the door hinges.
3 Detach the door from the appliance by unscrewing the door hinge M6x10 hex screws (4x)
at the top (B) and bottom (C) hinges.
A
2 Close the door and lay the appliance on its back on the pallet.
Required components/tools:
star T20 screwdriver
flat head screwdriver
M4 hex key
Top hinge
B
Bottom hinge
C