Planning Data Sheet
24" GAS ON STEEL COOKTOP
Model no:
CG244DNGX1 (refer page 1 for imperial measurements)
CG244DLPX1
Dimensions
mm
A Height of chassis (below top of countertop)
59
B Overall width of cooktop
600
c Overall depth of cooktop
50
D Height from counter datum to top of cooktop surface
6
E Depth of front control panel
85
F Depth of cooktop cooking area
442
G Width of chassis
555
H Depth of chassis
486
I Distance from top of counter to centre of gas inlet on
product
0
Minimum Clearances
mm
Minimum clearance from left edge of product to nearest vertical
surface
10
Minimum clearance from right edge of product to nearest
vertical surface
115
Minimum clearance from rear edge of product to nearest
combustible surface
160
Minimum clearance from rear edge of product to nearest non-
combustible surface
45
Minimum clearance from front edge of counter to front edge
of product
2
Minimum clearance from cooking surface to combustible
surface centered above the cooking surface
915
Maximum overall depth of overhead cabinetry
0
Minimum clearance below top of countertop to nearest
combustible surface
70
Minimum clearance below top of countertop to Fisher & Paykel
oven or nearest non-combustible surface
65
Cutout Dimensions
mm
Overall width of cutout*
560
Overall depth of cutout*
490
* Note cutout position is centred to the cooktop width but offset to the
cooktop depth. Cutout front depth is 9mm from the front edge of the product.
INDICATES PRODUCT DATUM -------------------------------------------
INDICATES CLEARANCES ------------------------------------------------
INDICATES CUTOUT --------------------------------------------------------
DATE: 27.07.2015
IMPORTANT NOTE: Throughout this guide, dimensions may vary by ±2mm
(/2''
). Please read the installation manual for detailed information on
installing the product. www.fisherpaykel.com
DATA SHEET
600
50
59
DATUM :
TOP OF COUNTERTOP
B
G
C
F
E
D
A
I
H
FRONT VIEW
PLAN VIEW
PROFILE VIEW
CLEARANCE : NONCOMBUSTIBLE SURFACE
CLEARANCE : COMBUSTIBLE SURFACE
CLEARANCE : COMBUSTIBLE SURFACE
CLEARANCE : NONCOMBUSTIBLE SURFACE
CLEARANCE : COMBUSTIBLE SURFACE
FRONT EDGE OF COUNTER