Installation Sheet
16
!7 INSTALLING A CUSTOM FRONT DRAWER PANEL
1
1
2
Electrical Shock Hazard
WARNING!
Before continuing, ensure that the product is 
disconnected from the power supply.
Failure to follow this warning may result in
electrical shock, injury or fire.
3
1
1
!7-A REMOVE PANEL BRACKET FROM PRODUCT
Remove side pins and gently 
pull off the panel bracket 
slightly.
Remove the Knock-to-Pause 
module from the back of the 
bracket.
Knock-to-Pause module
Side Pin
!7-B REMOVE THE KNOCK-TO-PAUSE MODULE
1  Disconnect the Earth Wire 
from the bracket
2  Unplug the knock sensor 
from the controller.










