Installation Sheet
15
1
2
3
4
4” (100mm)
!5-B   REFIT THE DRAWER ONTO THE RUNNERS
!6-B SECURE THE EXTERNAL VENT
Before refitting the 
drawer, ensure the hoses 
are not twisted and the 
latches at the rear of 
each drawer runner are 
facing forward. 
Lift or rotate counter-clockwise the 
drawer back onto the drawer runners 
on either side.
Pull the release tabs forward on both 
sides 4” (100mm). Ensure the tabs are 
fully pulled forward and click into place.
Release tab
After routing the vent hose through 
and out the hole cutout, attach and 
secure the vent by tightening the 
four screws provided.
Air flow
2
1










