Installation Guide

13
1
2
!3 THERE ARE THREE DIFFERENT PLUMBING AND DRAINAGE OPTIONS. CHOOSE WHICH IS MORE SUITABLE.
DRAINAGE OPTION 1
Dishwasher and Ø 1 1/2” (38 mm) Standpipe
min. R 8”
(200mm)
29 1/2” - 34 3/4” (750 - 883 mm)
1 1/2”
(38mm)
29 1/2 - 34 3/4” (750 - 883mm)
Screw Drain hose
support to back wall
at correct height.
If space is limited
for fixing, push
hose through drain
hose support
to required height.
max.
4 3/4“
(120mm)
step 14
min. 19 11/16” (500mm)
IMPORTANT!
Ensure that drain hose is installed as
close to the underside of the benchtop
as possible. This will ensure no waste
re-enters the drain hose in the event of
poor flow or a blockage in the plumbing.
Ensure the drain hose does not extend
into water retained in the trap; an air gap
is required to prevent waste water from
siphoning back into the tub.
IMPORTANT!
Ensure that drain connection will comply
with local plumbing regulations.