fischer Bolt anchor FAZ II The power anchor for highest demands NEW
Bolt anchor FAZ II For highest demands Powerful and flexible The distinctive edge holds the expansion clip in position even with reinforcement hits, thus ensuring safe installation. With a choice of pre-assembled normal washer or large washer GS and with washer HBS in compliance with wood construction standard DIN 1052 (not pre-assembled). The protruding hammer-in pin protects the thread from damage during setting.
Bolt anchor FAZ II K For highest demands Short and practical The 12 sizes of FAZ II K in zinc-plated or stainless steel versions can be used up to a fixture thickness of 20 mm. The shorter bolt with minimum embedment depth is the economic choice for numerous applications such as the fixing of cable trays and substructures for façades. With a choice of normal washer or large washer GS.
Applications Typical anchorage solutions for different building segments Metal construction Railings ■ With maximum embedment depth for maximum loads and minimum edge distance and axial spacing in cracked concrete ■ For applications with sophisticated design, visually appealling e. g.
Applications Design examples Processing of thin or slim components, balcony railings under thin concrete plate Basic conditions 90 mm ■ Fixing to the underside of the balcony ■ Rail load 0.5 kN/m ■ Length of balcony 2500 mm ■ Rail height 1000 mm 100 mm b/d = 160/180 Installation of cable trays with suspended supports Basic conditions fischer Competitor FAZ II 10/10 K 8.6 kN per anchor plate with 40 mm embedment depth and 55 mm drill hole depth Competitive product M 10/10 8.
Range h2 hef, max. t fix M max. M min. hef, min.
Range h2 hef, max. t fix M max. M min. hef, min.
Range h2 tfix hef, max. M M tfix hef, min. h2 Bolt anchor FAZ II GS (with large washer) / FAZ II HBS (washer compliant to timber construction standard DIN 1052) Art.-No.
Range h2 t fix M hef, min. Bolt anchor FAZ II K / FAZ II K GS (short version) Art.-No.
Loads Non-cracked concrete Bolt anchor FAZ II, FAZ II K and FAZ II GS (HBS) zinc plated steel / stainless steel / high corrosion resistant steel Permissible loads of a single anchor in non-cracked normal concrete (concrete compression zone) of strength class C20/25 (∼ B25) 1) 2) 3) Minimum spacings while reducing the load Type Min. spacing Min. edge distance Material fixing element Min.
Loads Cracked concrete Bolt anchor FAZ II, FAZ II K and FAZ II GS (HBS) zinc plated steel / stainless steel / high corrosion resistant steel Permissible loads of a single anchor in cracked normal concrete (concrete tension zone) of strength class C20/25 (∼ B25) 1) 2) 3) 9) Type Material fixing element Min.
fischer FIXPERIENCE The design and information software suite The modular design program includes engineering software and application modules. The software is based on international design standards (ETAG 001 and EC2, such as EC1, EC3 and EC5), including the national application documents. All common force and measurement units are available. Incorrect input will be recognized and the software gives tips to get a correct result. This ensures a safe and reliable design every time.
