Datasheet
■
With maximum embedment depth
for maximum loads and minimum
edge distance and axial spacing in
cracked concrete
■
For applications with sophisticated
design, visually appealling
■
With minimum embedment
depth for use in thin concrete
members from 80 mm thickness
e. g. FAZ II 10/10 H A4 e. g. FAZ II 10/10 K A4
Applications
Typical anchorage solutions for different
building segments
Metal construction
Railings
■
With maximum embedment depth
for heavy-duty façade substructures
■
In stainless steel
■
Version FAZ II GS for the even
better alignment of brackets with
long holes
■
With minimum embedment
depth for minimum loads or
shallow component thicknesses
■
27% less drilling effort com-
pared with the maximum version
and significantly fewer reinforce-
ment hits
Façade substructure
e. g. FAZ II 12/10 GS A4 e. g. FAZ II 10/10 K A4
Façade construction
■
With maximum embedment
depth, ideal for anchoring
sleepers/beams
■
Also ideal for extreme usable
lenghts
■
With extra-large washer version
HBS in accordance with wood
construction standard DIN 1052
■
With minimum embedment
depth but without load
reduction
■
27% less drilling effort (in
comparison to maximum
version)
e. g. FAZ II 12/100 HBS e. g. FAZ II 10/10 K GS
Timber construction
Railings Tension anchor
■
With minimum embedment
depth but without load
reduction
■
27% less drilling effort towards
the maximum version and far
fewer reinforcement hits
e. g. FAZ II 10/10 K
Sanitary / Heating / Electric
Cable traysPipe routes
e. g. FAZ II 6/10
■
Suitable for fixing of pipe hangers,
metal profiles or mounting rails
■
Approved for single point
anchorings