Datasheet

Your advantages at a glance
S
E
I
S
M
I
C
ETA-15/0352
EAD 330011-00-0601
Option 1 for cracked concrete
seismic performance category C1, C2
■ Suitable for the following
building materials:
- Cracked concrete
- Uncracked concrete
1
4
5
2
3
3
6
7
4
5
Short and practical
Bolt anchor FAZ II K
For highest demands
Short and practical
The shorter bolt with minimum embedment depth is
the
economic choice for numerous applications such
as the fixing of cable trays and substructures for façades.
The 12 sizes of FAZIIK in zinc-plated or
stainless steel versions can
be used up
to a fixture thickness of 20 mm
.
With a choice of normal
washer or large washer GS
.
■ The FAZIIK is suitable for pre-positioned and push-through
installation.
■ The small drill hole depth of the K-version speeds up installation
even further and reduces the number of reinforcement hits.
■ The properties of the FAZ II K considerably minimise the drilling
effort and the hammer blows required to drive in the bolt anchor,
saving energy and installation time.
■ The tried-and-trusted expansion clip ensures a high load-bearing
capacity even with minimum embedment depth. This guarantees
an unbeatable price-performance ratio.
Push through installation with hexagon nut
Create drill hole Clean drill hole Drive in anchor Apply installation torque Finished!
Approvals Recommendation
Push trough installation of the cup nut version with setting gauge
Set the fastener Check offset Turn on cup nut Apply installation torque Finished!
Drill-hole preparation