Owner's Manual

Page 7For technical questions, please call 1-888-866-5797.Item 63298

SAFETYOPERATIONMAINTENANCE ASSEMBLY

7. Insert the Handle (22) into the bracket on the Lift Arm / Shaft Assembly and align the upper and lower holes.

Secure in place using two Handle Bolts (17), Lock Washers (18), and Flat Washers (19).

Handle (22)

Handle Bolt (17) Handle Bolt (17)

Lock Washer (18) Lock Washer (18)

Flat Washer (19)Flat Washer (19)

Step 7: Install Handle

8. Insert the Wheels (1) into the wheel brackets on the rear of the Base (2) and align the holes.

Secure Wheels in place using Wheel Bolts (3) and Nuts (4).

Wheel

Bolt (3)

Wheel (1)

Wheel

Bracket

Base (2)

Nut (4)

Step 8: Attach Wheels