Owner's Manual

Page 6 For technical questions, please call 1-888-866-5797. Item 63298

SAFETY OPERATION MAINTENANCEASSEMBLY

6. Insert the Foot Pedal (40) into its holder on the Ram (43).

Secure the Foot Pedal in place using the Lock Washer (42) and Foot Pedal Bolt (41)

through the side of its holder.

Position the Ram in Upper Lift Arm / Shaft Assembly as shown.

Slide Lower (Long) Ram Pin (39) through the shaft bracket and the clevis base of the Ram.

Slide Upper (Short) Ram Pin (38) through the bracket on the Lower Lift Arm (21) and the top of the Ram.

Place a Washer (8) over both ends of each Pin.

Secure both ends of each Pin with R-Clips (23).

Lock Lock

Washer Washer

(42)(42)

Upper Ram Pin (38) Upper Ram Pin (38)

with Washers (8) with Washers (8)

and R-Clips (23)and R-Clips (23)

Lower Ram Pin (39) Lower Ram Pin (39)

with Washers (8) with Washers (8)

and R-Clips (23)and R-Clips (23)

Foot Pedal (40)

Foot Pedal Bolt (41)

Upper Ram Upper Ram

PinPin

Lower Lower

Ram PinRam Pin

Ram Secured Ram Secured

In PlaceIn Place

Step 6: Attach Foot Pedal and Install Ram