Certifications 2

Safety Data Sheet as per regulation (EC) 1907/2006
Commercial Product Name : Acrylic Sealing Compound DA
..
Revision Date : 30.03.2017 Replaces version from : 03.07.2014
Version : 3.1 /en
Print date : 05.04.2017
4 / 8
SECTION 8: Exposure controls/personal protection
8.1 Control parameters
The product does not contain any relevant quantities of materials with critical values that have to be
monitored at the workplace.
8.2 Exposure controls
Respiratory protection No personal respiratory protective equipment normally required.
Hand protection not required under normal use
Suitable material : butyl-rubber, Chloroprene, Nitrile rubber
Unsuitable material : PVC disposable gloves
Material thickness : adjust to application and duration of use
Break through time : adjust to application and duration of use
Remarks : Replace when worn. Request information on glove permeation prop-
erties from the glove supplier. Be aware that in daily use the dura-
bility of a chemical resistant protective glove can be notably shorter
than the break through time measured according to EN 374, due to
the numerous outside influences (e.g. temperature).
Eye protection Tightly fitting safety goggles
Skin and body protection Wear suitable protective equipment.
Note : Choose body protection according to the amount and concentration
of the dangerous substance at the work place.
General protective and hygiene
measures
Smoking, eating and drinking should be prohibited in the application
area.
Avoid contact with skin, eyes and clothing.
Take off all contaminated clothing immediately.
Wash hands before breaks and at the end of workday.
Keep away from food, drink and animal feedingstuffs.
Use protective skin cream before handling the product.
Information on environmental
protection regulations
No special environmental precautions required.
SECTION 9: Physical and chemical properties
9.1 Information on basic physical and chemical properties
Form paste
Colour various
Additional information on
colour :
see label
Odour characteristic