Owner's Manual

Dealer Activation & Installation
•
0
Confirm you r Drone X1 is connected to power by verifying th at the
on-board LE Ds are light ing up. Dr one X1 modules can be con n ected to
powe r via the following:
• A di r ect co n nection to a compatible afte r market re m ote start or
secu r ity system using the included data harness.
• A direct connec t ion to the vehicle's OBD-11 por t utilizing the
FT-HRN-X1-OBD hardwire harness (sold separately).
Go to myFirstec h Install at https://install.myfirstech.com using your
desktop, tablet, o r smartp h one's web browser.
Note: Internet Explorer is no t supported.
Logi n to your DroneMob ile Dealer Account and enter th e Drone X1
device's serial nu mber. It is the top barcode on the modu le sticker.
• You cannot use your pe rsonal DroneMobile User Account to
activa te a Drone X1.
• If you do not have a dealer login, you can "Activate as Guest". You
will also be required to also enter the Drone X1 device's ICC ID.
Activate, test, and configure your Dro ne X1 system by fo ll owing the
prompts on your web browser.
IMPORTANT NOTICE:
For your security, the X1MAX is equipped with a Lithium-ion Backup Battery, which
automatically activates in the event of main battery shutoff . If connected to the
DroneMobile app, the X1MAX will alert you when the backup battery is activated.
• Do not attempt to disassemble, open or service the battery pack .
• Do not crush, puncture. or dispose of in fire or water.
• Do not store above 140°F (60°C)
• Do not place near sources of heat or sunlight
install.myfirstech. com [phone]