In-Vehicle Mounting Solutions | Docking Stations | Install Services www.firstmobiletechnologies.com w 1.800.330.
contact JUMP to Table of Contents tollfree 800.330.5399 phone 610.828.1492 fax 610.828.1195 email fmt.info@firstgroup.com address 1013 Conshohocken Road, Suite 312 Conshohocken, PA 19428-0978 www.firstmobiletechnologies.com w 1.800.330.
table of contents (click on a section below to jump to that page) contact information 2 mobile system: at a glance 4 installation services 5 docks and cradles 6-15 for Panasonic for Dell for universal use 6-7 8-15 16 tilt/swivel 17-18 top plate 19 poles 20 quality story 21 dedicated base mount selection 22-23 dedicated base mounts 24-35 universal base mounts 36-38 accessories screen holders 39-43
First Mobile Technologies’ products are interchangeable and allow you to build a solution that best fits your needs. JUMP to Table of Contents A basic system consists of the following items: FirstDock™ or FirstCradle™ FirstCradle™ is a secure device that locks your computer in place.
Installation Services JUMP to Table of Contents First Mobile Technologies’ nationwide installation service enables us to install your solution whenever and wherever you need it. With the experience of more than 50,000 installations, First Mobile Technologies has developed a level of process and installation expertise that is unmatched. In fact, we are the only mobile technology company that offers a comprehensive range of services.
Docks and Cradles [for Panasonic™] CF-30 Toughbook FirstDock™ also compatible with CF-18 Panasonic Toughbook Part # FM-D-CF19 also compatible with CF-29 Panasonic Toughbook Part # FM-D-CF30 JUMP to Table of Contents CF-19 Toughbook FirstDock™ Panasonic dock features Durable Design Engineered and tested to a military standard (MIL-STD-810F), the benchmark for vibration and crash resistance certification Full Port Replication One simple connection provides access to 13 expansion ports including: VGA, D
Docks and Cradles [for Panasonic™] Part # FM-DT-CF52 JUMP to Table of Contents CF-52 Toughbook First Mobile™ Docking Tray Full Port Replication Designed for use with the Panasonic Port Replicator (required), which can also be purchased through your FMT salesperson (Part #CF-VEB522M), the CF-52 Docking Tray provides full access to USB connectors (4), DisplayPort, RJ-45, serial, AC jack, power button, cable lock slot, and slide release.
Docks and Cradles [for Dell™] JUMP to Table of Contents E6400XFR™ Notebook FirstDock™ (FirstCradle also available for the E6400XFR Notebook: see page 12) Part #’s: FM-D-XFR-E FM-D-XFR-E-RF FM-D-XFR-E-W/PS FM-D-XFR-E-W/PS-RF Superior Functionality The new E-XFR FirstDock custom docking station includes several exclusive features: Internal power supply option available.
Docks and Cradles [for Dell™] JUMP to Table of Contents E6400 | E6410 | E6400ATG | E6410ATG Notebook FirstDock™ Part # FM-D-E6400 or # FM-D-E6400-W/PS Durable and Functional Design The new E-ATG FirstDock custom docking station includes the same dynamic features of the E-XFR model (see page 8 for more details), however the E-ATG is not RF Pass Thru-compatible.
Docks and Cradles [for Dell™] Part # FM-CP-ATG-E JUMP to Table of Contents E6400 | E6410 | E6400ATG | E6410ATG Notebook FirstCradlePlus™ [scratch resistant clamps] to protect and secure the computer. Clamps come in four different sizes (and colors) to fit the E6400 or E6400ATG, either with or without a port replicator. [non-glare surface finish] for maximum in-vehicle usability [made with heavy-gauge metal] for vibration resistance and safety.
Docks and Cradles [for Dell™] JUMP to Table of Contents E6400 | E6410 | E6400ATG | E6410ATG Notebook FirstCradlePlus™ (Pictured below with the Dell Advanced Port Replicator, sold separately by Dell. The FirstCradlePlus is also compatible with the Dell Standard Port Replicator, also sold separately by Dell.) [Optional Dell Advanced Port Replicator] Attaches to the FirstCradlePlus to add the connectivity and features of a full vehicle docking station (sold separately by Dell).
Docks and Cradles [for Dell™] JUMP to Table of Contents FirstDock™ for the Latitude™ XT2 XFR Tablet Part #’s: FM-D-XFR-XT2 FM-D-XFR-XT2-RF Built-in 8x DVD±RW Drive that reads and writes to CDs and DVDs Option to add 3 RF (antenna) Pass Thru’s for the functionality you require (Part # FM-D-XT2-XFR-RF) vailable ports include a serial connector, audio connector, 4 USB 2.
Docks and Cradles [for Dell™] JUMP to Table of Contents E6400XFR Notebook FirstCradle™ Part # FM-C-XFR-E [optimal footprint] Custom designed for the Dell Latitude E6400 XFR Notebook to provide maximum in-vehicle user space [key lock system] Deters theft by securing the XFR Notebook to the FirstCradle, and allows for easy placement and removal of computer [scratch resistant clamps] to protect and secure the computer while driving.
Docks and Cradles [for Dell™] D620 | D630 | ATG Notebook FirstDock™ Part # FM-D-XFR Part # FM-D-D620 JUMP to Table of Contents D630 XFR™ Notebook FirstDock™ Features RF Pass-Thru (FM-D-XFR-RF Dock Only) Provides external (vehicle mounted) antenna connection capabilities (TNC) for XFR notebooks with integrated WiFi (802.
Docks and Cradles [for Dell™] JUMP to Table of Contents D620 | D630 | ATG Notebook FirstCradle™ Part # FM-C-D620 [scratch resistant clamps] for touch points with computer [non-glare surface finish] for maximum in-vehicle usability [made with 16-gauge steel] for vibration resistance and safety. Closes Completely Laptop lid closes completely while docked. [key lock system] Engages and secures the Dell Notebook to the First Mobile Technologies docking station.
Docks and Cradles [for Universal use] JUMP to Table of Contents New FirstCradle™ Universal Part # FM-C-UNIV2 One Size Fits All Small enough to fit a 9.25” Netbook, for secure and affordable in-vehicle computing. Expands to over 15.5” to securely hold almost any size notebook computer on the market [back view] Steel Housing, 0.078-inch thick, to withstand the toughest environment.
Tilt / Swivel Part # Length FM-TS-S 9.5” FM-TS-L 10.5” JUMP to Table of Contents Attaches to the end of the top plate, allowing the computer and dock to pivot and tilt for optimal positioning and user comfort with positive lock feature and 0-80° of tilt and 360° of swivel. Extra long handle for ease of use available in the FM-TS-L. [tilt/swivel accessories] Base Plate Base plate mounts onto a vertical surface or console box.
Tilt / Swivel Spacer Block JUMP to Table of Contents [tilt/swivel accessories - continued] Spacer Block is designed to be used between existing mounting equipment and tilt swivel to add 1.5” of additional height Part # FM-SPBLK Universal Mounting Plate Adapter The Universal Mounting Plate Adapter is designed to attach any FirstDock or FirstCradle to a competitor’s mounting equipment. Comes with instructions and examples of various competitors’ mounting patterns for easy installation.
Top Plates 6” Top Plate JUMP to Table of Contents Top plates provide vertical and horizontal movement to allow the user to move the laptop between the driver and passenger. Six-inch Top Plate is designed for insertion into pole assembly Part # FM-TOP-06 9” Top Plate Nine-inch Top Plate features a swing arm. Set collar keeps the tube adjusted to the correct height while rotational adjustments are made Part # FM-TOP-09 Twelve-inch Top Plate features a swing arm.
Poles [for Universal use] JUMP to Table of Contents Poles attach to the various base mounts and set the height of the overall mount configuration. Poles are made with sturdy 12-gauge poles and 7-gauge steel plates for bolting to the base.
[our quality story] JUMP to Table of Contents “ First Mobile Technologies is a quality company that services its customer in a timely manner. They go out of their way to meet customer needs and provide a high quality product. ” Mel Bauernfeind Baltimore County Electric Services “ The quality of First Mobile hardware and experience and skill of their professional installers is an integral part of the solutions we offer to the emergency responder marketplace.
Base Mounts JUMP to Table of Contents First Mobile Technologies has more dedicated base mounts than anyone in the industry. To identify the base mount that works best with your vehicle, locate the make | model | year of your vehicle and read across to the corresponding part number. If your vehicle is not listed, or you need to mount to a boat, forklift, or other vehicle application, call your First Mobile Technologies sales representative to help you find a mobile solution that best fits your needs.
Base Mounts Make Model Year Bucket or Bench Drill seating Required Passenger Seat Mount Part Number JUMP to Table of Contents Dodge/ Chrysler (continued) Ram 2003-newer Both 2003-2004 Bucket 2005-newer Bucket FM-B-RM4W2 Bucket FM-B-Sprinter Sprinter FM-B-RM3 YES FM-B-RM4W Ford Crown Victoria All model years Both All model years Bucket Escape 2005-newer Bucket FM-B-ESC Excursion 2000-newer Bucket FM-B-EXC Expedition 2000-2002 Both FM-B-EXPD2 2003-newer Bucket FM-B-EXPD3
Dedicated Base Mounts [for Chevrolet/GMC] JUMP to Table of Contents Blazer S-10 Series Hump Mount Part # Bucket/ Bench Drilling Required Pole Required Top Plate Required FM-B-BLZ Bucket No 5” or 9” 6”, 9” or 12” Bucket/ Bench Drilling Required Pole Required Top Plate Required Bucket No included 6”, 9” or 12” Passenger Side Base and Pole Mount Part # FM-BP-BLZ Canyon/Colorado Hump Mount Part # FM-COL-H Bucket/ Bench Drilling Required Pole Required Top Plate Required Both No 5”, 9”
Dedicated Base Mounts [for Chevrolet/GMC] JUMP to Table of Contents CK1500-CK3500 Hump Mount Part # FM-B-CK2 Bucket/ Bench Drilling Required Both Yes Pole Required Top Plate Required 5”, 9” or 14” 6”, 9” or 12” Silverado/Sierra Hump Mount Part # FM-B-CK3 Bucket/ Bench Drilling Required Pole Required Top Plate Required Both No 5” or 9” 6”, 9” or 12” Bucket/ Bench Drilling Required Pole Required Top Plate Required Bucket No 9” or 14” 6”, 9” or 12” Pole Required Top Plate Required
Dedicated Base Mounts [for Chevrolet/GMC] JUMP to Table of Contents Impala Passenger Side Base and Pole Mount Part # FM-B-IMP Bucket/ Bench Drilling Required Pole Required Top Plate Required Both No 5”, 9” or 14” 6”, 9” or 12” Bucket/ Bench Drilling Required Pole Required Top Plate Required Both Yes 5”, 9” or 14” 6”, 9” or 12” Passenger Side Base and Pole Mount Part # FM-B-IMP2 Suburban/Tahoe Hump Mount Part # FM-B-CK2 Bucket/ Bench Drilling Required Pole Required Top Plate Required
Dedicated Base Mounts [for Chevrolet/GMC] JUMP to Table of Contents Suburban/Tahoe Passenger Side Base and Pole Mount Part # Bucket/ Bench Drilling Required Pole Required Top Plate Required Bucket No included 6”, 9” or 12” FM-BP-TAH Topkick/ Vans: Astro and Fullsize Flat floor Base and Pole Mount Part # Bucket/ Bench Drilling Required Pole Required Top Plate Required Both Yes included 6”, 9” or 12” Bucket/ Bench Drilling Required Pole Required Top Plate Required Bucket No included
Dedicated Base Mounts [for Dodge] JUMP to Table of Contents Caravan Side Base Mount Part # Bucket/ Bench Drilling Required Pole Required Top Plate Required FM-B-CARAVAN Bucket No 5”, 9” or 14” 6”, 9” or 12” Charger/Magnum/300 Side Base Mount Part # Bucket/ Bench Drilling Required Pole Required Top Plate Required FM-B-CHGR Bucket No 5”, 9” or 14” 6”, 9” or 12” Pole Required Top Plate Required Dakota/Durango Side Base Mount Part # Bucket/ Bench Drilling Required FM-B-DUR Bucket No
Dedicated Base Mounts [for Dodge] JUMP to Table of Contents Ram Base Mount Part # FM-B-RM3 Bucket/ Bench Drilling Required Pole Required Top Plate Required Both No 5”, 9” or 14” 6”, 9” or 12” Bucket/ Bench Drilling Required Pole Required Top Plate Required Bench Yes 5”, 9” or 14” 6”, 9” or 12” Base Mount Part # FM-B-RM4W Base Mount Part # FM-BP-RM4W2 Bucket/ Bench Drilling Required Pole Required Top Plate Required Bucket No 5”, 9” or 14” 6”, 9” or 12” Sprinter Passenger Seat Mou
Dedicated Base Mounts [for Ford] JUMP to Table of Contents Crown Victoria Base and Pole Passenger Side Mount Part # FM-BP-12 Bucket/ Bench Drilling Required Pole Required Top Plate Required Bucket No included 6”, 9” or 12” Bucket/ Bench Drilling Required Pole Required Top Plate Required Bucket No 5” or 9” 6” or 9” Bucket/ Bench Drilling Required Pole Required Top Plate Required Bucket No 5”, 9” or 14” 6”, 9” or 12” Escape Passenger Side Seat Mount Part # FM-B-ESC Excursion Passen
Dedicated Base Mounts [for Ford] JUMP to Table of Contents Expedition Side Mount Part # FM-B-EXPD3 Bucket/ Bench Drilling Required Pole Required Top Plate Required Bucket No 5”, 9” or 14” 6”, 9” or 12” Bucket/ Bench Drilling Required Pole Required Top Plate Required Both No 5”, 9” or 14” 6”, 9” or 12” Pole Required Top Plate Required Explorer/ Ranger Hump Mount Part # FM-BP-RAN2 Side Mount Part # FM-B-EXPLS Bucket/ Bench Drilling Required Bucket No 5”, 9” or 14” 6”, 9” or 12” Sid
Dedicated Base Mounts [for Ford] JUMP to Table of Contents F-Series F150 Side Base Mount Part # FM-B-FS2 Bucket/ Bench Drilling Required Pole Required Top Plate Required Both No 5”, 9” or 14” 6”, 9” or 12” Bucket/ Bench Drilling Required Pole Required Top Plate Required Bucket No 5”, 9” or 14” 6”, 9” or 12” Bucket/ Bench Drilling Required Pole Required Top Plate Required Both No 5”, 9” or 14” 6”, 9” or 12” Side Base Mount Part # FM-B-FS-S Hump Mount Part # FM-B-FS-H F-Series F25
Dedicated Base Mounts [for Ford] JUMP to Table of Contents F-Series F250/ 350/ 450 Side Mount Part # FM-B-EXC Bucket/ Bench Drilling Required Pole Required Top Plate Required Bucket No 5”, 9” or 14” 6”, 9” or 12” Pole Required Top Plate Required Ranger Hump Mount Part # Bucket/ Bench Drilling Required Both No Part # Bucket/ Bench Drilling Required Pole Required Top Plate Required FM-B-EXPLS Bucket No 5”, 9” or 14” 6”, 9” or 12” FM-BP-RAN2 5”, 9” or 14” 6”, 9” or 12” Side Moun
Dedicated Base Mounts [for Ford] Vans: Econoline Series JUMP to Table of Contents Flat Floor Base and Pole Mount Part # Bucket/ Bench Drilling Required Pole Required Top Plate Required Both Yes included 6”, 9” or 12” Part # Bucket/ Bench Drilling Required Pole Required Top Plate Required FM-BP-TRANSIT Bucket No included 6”, 9” or 12” FM-B-54 Vans: Transit Connect Base and Pole Passenger Side Mount [for Freightliner] Freightliner Side Base Mount Part # FM-B-FR8-M2 Bucket/ Bench Dri
Dedicated Base Mounts [for Jeep] JUMP to Table of Contents Grand Cherokee Side Base Mount Part # Bucket/ Bench Drilling Required Pole Required Top Plate Required Both No 5”, 9” or 14” 6”, 9” or 12” Bucket/ Bench Drilling Required Pole Required Top Plate Required Bucket No 5”, 9” or 14” 6”, 9” or 12” Bucket/ Bench Drilling Required Pole Required Top Plate Required Bucket No FM-B-CHER Side Base Mount Part # FM-B-CHER2 Liberty Base and Pole Side Mount Part # FM-BP-12 12” included 6”
Universal Base Mounts Flat Floor Base and Pole Mount JUMP to Table of Contents Flat Floor Base and Pole Mount is designed for vehicles with high seats, such as vans, trucks and fire engines. Also available with a 36” post. Part # FM-B-52 Bucket/ Bench Drilling Required Pole Required Top Plate Required Both* Yes included 6”, 9” or 12” [Support Accessories for Universal Base Mounts] Quick Removal Mounting Base The Quick Removal Mounting Base for the FM-B-52 allows for quick removal of equipment.
Universal Base Mounts Passenger Base Mount JUMP to Table of Contents Passenger Base Mount allows equipment to be mounted close to the vehicle hump. Part # FM-B-69 Bucket/ Bench Drilling Required Both Yes Pole Required Top Plate Required 5”, 9” or 14” 6”, 9” or 12” Wall Base Mount Wall Base Mount allows equipment to be mounted to vertical surfaces or the sides of large vehicles such as trucks or vans, while providing added support.
Universal Base Mounts JUMP to Table of Contents Vertical Surface Base Mount Vertical Surface Base Mount is designed for the sides and vertical surfaces where space is limited, or to existing console areas. Part # FM-B-08 Bucket/ Bench Drilling Pole Required Required NA Yes Included Top Plate Required 6”, 9” or 12” Horizontal Surface Base Mount Horizontal Surface Base Mount is designed to be mounted where space is limited, such as desktops, buses and fire engines.
Accessories [screen holders] JUMP to Table of Contents Screen holders add ease to your mobile computing by securing your screen in place. Available for the following computers: • • • • • Panasonic CF-29, CF-30, & CF-52 Dell 620/ 630/ ATG Dell D-XFR Dell E6400 Series Dell Latitude XT2 XFR An adjustable screen holder is available for all other computer models. www.firstmobiletechnologies.com w 1.800.330.
Accessories [console units] JUMP to Table of Contents Console Box Universal Base Plate Console Box Universal Base Plate provides a platform for mounting brackets, poles and console boxes. It is designed so wiring can be fed from underneath for convenience. It is also threaded for easy pole assembly. Part # FM-B-PLATE Leg Kits Leg kits are for use with the Console Box Universal Base Plate [FM-B-Plate]. and attach to seat bolts. No drilling is required for most vehicle models.
Accessories [console units] JUMP to Table of Contents Console Box Console Box is 14” of inside box space for communications equipment. Made of 14-gauge powder-coated steel. Complete with faceplates and filler panels. Part # FM-MC-14 Console Box Accessories Snapfit™ Faceplates Filler Panel Snapfit™ Faceplates are used with the console box. These panels cover the spaces on the sides of the radio unit when stored in the console box, providing a finished look. Available in several lengths.
Accessories [Pentax printer mounting hardware] JUMP to Table of Contents Pentax Printer Mount Pentax Printer Mount is designed for use with any Pentax Pocket Jet series mobile printer. Fast-release design for fast printer docking and undocking to allow for use either in or out of vehicle. Use with roll paper. Optional Pentax Roll Holder (FM-PTX-ROL) available. Part # FM--PTX-CMB Pentax Armrest Mount Pentax Armrest Mount attaches to the pole and houses both the Pentax printer and a roll of paper.
Accessories [power supplies] Direct to Battery Wiring Kit JUMP to Table of Contents Part #: FM-WIRPK Direct to Battery Wiring Kit comes in a neat, professional package that is designed to ease connectivity and cut the installation time. Complete with 15 feet of vinyl-covered 12-gauge wire, the kit features a locking disconnection plug and a waterproof ATC 25amp fuse holder. A heavy-duty 50-amp version is also available (FM-WIRPK50).
WARRANTY STATEMENT Partnership Services First Mobile Technologies warrants to the original purchaser of our products that at the time of purchase our products will perform to its specific ratings and will be free from defects in materials and workmanship under normal use. The warranty period shall begin at the time of delivery. First Mobile Technologies warrants its vehicle mounting equipment for five years. Docking stations and electrical parts are warranted for one year only.
JUMP to Table of Contents Our History Founded in 1994, First Mobile Technologies provides full turnkey hardware solutions for integrating mobile computers, mounting equipment and communication systems into environments requiring rugged technology. We are uniquely positioned to serve the public safety, utility, transportation, government, military, healthcare, manufacturing, industrial, oil and gas, and marine markets–in addition to many others.
