User Manual

Chapter1 Getting Started
11
Rear Panel
Figure 1-2. The rear panel of ViewBox 100
The rear panel of the ViewBox 100 is where you connect power, peripheral devices
such as a PS/2, input devices and output devices such as the display monitor. Please
refer to the above figures for the location of each of the rear components, as shown in
Figure 1-2.
1. Wall Line Jack (optional): (HPNA Configuration)
This jack is connected to the phone line.
2. Phone Jack (optional): (HPNA Configuration)
This jack is connected to the telephone.
3. RJ45 LAN connector:
For connecting with your LAN to access the network services or surf the Internet.
4. S-Video Connector:
The ViewBox System has a video port that that provides composite video output
to a PAL or NTSC video monitor or VCR.
5. AV Connector:
The ViewBox 100 also provides a AV connector for transmitting video data to a
TV.