User Manual

SlateVision System User Guide

Pen Calibration

If you find that the tip of the stylus does not accurately point at items on the screen,

then you can calibrate how the screen responds to the pen. This option allows you can

calibrate your stylus. To do the pen calibration:

1. Press the 1

Menu button to invoke the first main menu.

2. Use the

up/down arrow buttons to select

Pen Calibration

3. Press the Enter button to brings up Tablet and Pen Settings dialog box.

4. In the

Settings

tab, tap the

Calibrate

5. There will be crosshair appearing at the four corners of the screen. Tap on the

center of the each crosshair accordingly.

6. After finished the calibration, tap OK to exit.

NOTE

 You can also tap the Tablet and Pen Settings icon in the Control Panel to do

the pen calibration. For more the information, please refer to “Tablet and Pen

Settings - Settings Tab - Setting up stylus and calibration” in this chapter.