User Manual

Using Stylus and Tablet Buttons
35
2. Setting up stylus and calibration
If you find that the tip of the stylus does not accurately point at items on the
screen, then you can calibrate how the screen responds to the pen.
 Under Calibration, tap the Calibrate, as shown in [Figure 4.2.1].
 There will be crosshair appearing at the four corners of the screen. Tap on
the center of the each crosshair accordingly.
 After finished the calibration, tap OK to exit.
Figure 4.2.2 Screen calibration
Display Tab
Figure 4.3.1 Display tab