User's Manual

Using Options 7
107
1. Make sure the system is powered off, the battery also is removed and that
no peripheral devices are attached.
2. Turn the computer upside-down and locate the screw that secures the
DIMM door at the underside of the notebook.
3. Remove the screw and open the DIMM cover by your finger.
4. Locate the memory module into the empty memory module
sockets. (Your system comes with one memory module
already installed in the socket.)
• Avoid touching the exposed components inside the system. Doing so may
damage the system.
5. Insert the connector of the memory module into the socket. Make sure the
notch of the memory module fits the nose of the socket.
 Hold the memory module at a 30-degree angle and push its
connector into the memory socket of the notebook.
 Press down on the edge of the memory module until the locking
tabs on both sides is locked.
6. Put the DIMM door back and secure the screw on the DIMM door.
7. Turn the system over.