User's Manual

Enter the name you want, such as “Charles”, in the “Account” field. You can also enter “Group

Name”, “Way to generate password”, “Disk Quota”, or “User Directory” here by the way, and

then click “Submit” as shown in the figure below. There is the difference between the upper

and lower cases of the account name of users in the UNIX system, therefore please pay

attention when entering the data. Recommend to use lowercase otherwise you may not sent

or received e-mail normally in MS-windows system.

5.1.2 Create Multi-user Accounts by Serial Number

This feature is similar to what is mentioned above, except for requiring additional entry fields.

After clicking “Add” in “User”, as shown in the figure below, enter the same account name in

the “Account” field. Then enter the range of serial number according to your requirement. The

settings of other parts are the same as those in adding single-user accounts.

For instance, create the accounts ranging from test001 to test100 as shown in the table

below.

Click “Submit” and a report will be generated based on the serial number, as shown in the

figure below: