User's Manual

36
Chapter 7 Firewall
Maat system provided packet filter function for user to filter specific traffics. It allows user
to define firewall rules by IP, port, protocol and direction of packet. This firewall function
provided user a basic security infrastructure. Please click on “Configure” of “Firewall”.
The diagram show as below:
Click on “Enable” to activate the firewall function.
7.1 Allow Port Configure
Maat system allows user to define their firewall rule depend on port, protocol (TCP or
UDP) and direction of packet (Input or Output). System has pre-defined port number and
protocol into the configuration table. User can click on desired item to enable (or disable)
required configuration. Please click on “Config Allow Port”, the table show as below: