User's Manual

15
The range here can be on a basis of domain names or IP addresses.
(Note: The rule fields of the system allow continuous entry of data, without any limitation
on the space shown in the screen.)
In order to prevent from any unauthorized utilization of mail relay. Maat system included
an authentication facility to challenge user with user ID and password. When user’s
domain that is not in “Relay” list, system will prompt for user ID and password. User will
be denied if authentication does not successful.
If user wants to enable the authentication facility please refer to related Email application
(such as Outlook Express) to make appropriate configuration.
6.6.6 Configure Group Mail Domain
In general, you can have emails sent in groups by configuring the settings here. In other
words, whenever you send a mail within a domain, the mail will be delivered to every
body of the same group as long as you keyed in a “group name @ mail server name” for
the mail. Of course, you have to know the group’s name before doing so.
Please select “Group Mail Domain” in “Mail” of the “Service” interface. Then a screen will
appear as follows: