User's Manual

12
sometimes caused by the mistakes of these configuration files’ content or those of file
permissions.
6.6.1 Mail Configuration
It is mainly used to configure email size limit.
Please select “Configure” in “Mail Service” interface. Then a screen will appear as
follows:
Now you can configure mail size; if you do not specify, mail size will be 0 Bytes. (Note:
The unit is Bytes. So if you want to configure as 1MB, you should configure as 1024000
Bytes.)
6.6.2 Mail Alias
Click on “Mail Alias” you can specify the alias for whom to receive the mail. For example;
If you specify “Johnny, Richard, James” as the alias for “Sales Team”. All the mail to
“Sales Team” will be forwarded to Johnny, Richard and James. The screen will appear as
follows:
6.6.3 Mail Access List Configuration
In general, the settings configure the accessible IP address block or domain name for
the mail. During installation, the management interface will automatically set up a default
value for the properties here. Therefore, in general, it is unnecessary to change these
settings unless you want to edit, add or delete some DNS configurations yourself.
Please select “Mail Access List Configuration” in “Mail” of the “Service” interface. Then a
screen will appear as follows: