User Manual

Notebook User Guide

comes with a Windows operating system pre-installed in your hard drive.

Consult the Windows manual on how to use the program. If not, contact your

dealer for assistance.

2.4 Adjusting the Display Controls

The LCD brightness adjustment is controlled by <Fn> +<F8> and <Fn> +

<F9> keys respectively. You need to press these hot-key controls after

powering on your notebook to suit your viewing pleasure.

The Brightness hot-key control adjusts the brightness on the LCD. The

brightness hot-key control will not set the LCD completely dark or bright; it

provides sufficient lighting to the LCD to match the external lighting of the

surrounding. The brighter the room, the more you need to increase the

brightness of the LCD.

2.5 Installing the Notebook Device

Drivers

If you already have an operating system installed into your notebook

computer, it is best to install the needed device drivers for using the built-in

devices of your computer. Before installing the drivers, check with your dealer

first if they have already installed all the drivers along with the operating

system. If not, follow the procedures below:

INSTALLING WINDOWS VISTA FROM OPTICAL DISK DRIVE

To install Windows Vista directly from your optical disk drive, please go to

Boot menu of BIOS setup menu. Use arrow key to select "CD-ROM Drive",

then use "+" or "-" to move it to the top. Go to Exit menu and select "Exit