User's Manual

Using the BIOS Setup Utility 3-27
Looking at Switch Settings
The following figure shows the default switch settings. Switch setting descriptions
follow the figure.
Default switch settings
Never use a pencil to change switch settings. Residue from
the pencil can damage the system.
Using a fine-tipped object to gently change a switch setting between “ON” or “OFF.”
! Switch 1, Keyboard Select — The default setting is “ON” for U.S. keyboard.
! Switch 2, Keyboard Select — The default setting is “OFF” for U.S. keyboard.
! Switch 3, Reserved for Factory Use — The default setting is “OFF.”
! Switch 4, Password Override Switch — The default setting is “OFF.” If you forget
your password and cannot access the data on your NEC Versa, change the setting to
“ON” to erase your current password.
! Switch 5, Reserved for Factory Use — The default setting is “OFF.”