User's Manual

Fun with Multimedia 4

For MMC and SD card, you should position the copper connector at the

bottom side. For SmartMedia and Memory Stick card, you should position the

copper connector at the topside. All of these cards should be located at the

center of the slots in inserting.

Slot Card type Copper connector

4 in 1 SD (Secure Digital)

MMC (MultiMedia Card)

SmartMedia

Memory Stick

Bottom side

Bottom

Top side

Only one correct side can be accepted for the 4 in 1 card slots. If you cannot

insert the card into the 4 in 1 slot or you had inserted the card but it is not

recognized by the computer, please remove the card and turn the card upside

down and insert it again. To prevent the damage made both on card and the

slot, never forced an entry into the slot with incorrect side.