User's Manual

Notebook User Guide

1. Make sure the computer is turned on. Press the eject button found on the

door cover of the optical disk drive. The CD tray mechanism will pop-out

slightly and slowly pull out the whole length of the tray.

2. Place the disc on top of the CD tray with the label side facing up. Gently

press the compact disc onto the center spindle to secure the disc.

3. To remove the disc, press on the center spindle and pull up the disc from

the side until the disc snaps out of the spindle lock.

☞

If the eject function is disabled by software or a power failure occurs, the

Emergency Eject Hole allows you to manually remove a CD from the drive.

4. To close the optical disk drive, simply push the CD tray inside. The optical

disk drive LED will activate when the disc is detected. Wait until the LED

has turned off and then start to read the disc.

How to care the CD

When you handle CDs, pay attention to the following guidelines:

• Always pick up the CD by its edges.