User's Manual

Notebook User Guide

Please Refer to Section 6 "Installing the Notebook Device Drivers" of Chapter

2 in this manual for the procedures on how to install the VGA device driver

under Windows. After installing the VGA driver, you would then configure the

display resolution or screen size to match your LCD display panel. You would

also probably want to set the amount of color output to display sharper images

and photos.

POSSIBLE DISPLAY CONFIGURATIONS

The table below shows you the possible display resolution you can set when

using either the LCD display or the external monitor (CRT):

Display Possible Resolution Maximum Colors

1280x800

WXGA LCD

640x480

800x600

1024x768

1280x800

16 million colors

CRT Only 640x480

800x600

1024x768

1280x1024

16 million colors

☞

65,536 or 64K colors is also equivalent to 16-bit high color while 16 million or

16M colors is equivalent to 32-bit true color.

☞

You can use the <Fn> + <F3> hot-key to switch the display between LCD

only, CRT only, or both LCD and CRT display.