User's Manual

Using Options
7
111
I
NSTALLING
M
EMORY
M
ODULE
Your computer comes with standard 128MB, 256MB or 512MB of
synchronous DDR SDRAM . You can increase system memory to a maximum
of 1024 MB in the system, by installing one small outline double inline memory
modules (SO-DIMMs) with installed base memory in the system.
The 128MB, 256MB or 512MB memory module are available:
To install the memory module:
1. Make sure the system is powered off, the battery also is removed and that
no peripheral devices are attached.
2. Turn the computer upside-down and locate the screw that secures the
DIMM door at the underside of the notebook.
3. Remove the screw and open the DIMM cover by your finger.
4. Locate the memory module into the empty memory module sockets.
(Your system comes with one memory module already installed in the
socket.)
☞
Avoid touching the exposed components inside the system. Doing so may
damage the system.