User's Manual

Notebook User Guide

• Set Supervisor Password

Supervisor password gives you the authority in accessing the setup utility.

You also need to enter this password in system booting and resuming

from suspend mode. When you press <Enter> in this field, the Set

Supervisor Password dialog box appears. Enter a new password with up

to 8 alpha-numeric characters, and then re-enter it for confirmation.

• Set User Password

This field is only available when Supervisor Password has set. Enter the

user password when boot the system or resume from suspend mode. But

if the Write Protect is set in the Fixed disk boot sector field, you should

enter a supervisor password to access the fixed disk when boot the system

or resume from suspend mode.

• Set Primary Hard Disk Password

This password gives you the authority in accessing the Hard Disk. When

you press <Enter> in this field, the Set Supervisor Password dialog box

appears. Enter a new password with up to 8 alpha-numeric characters,

and then re-enter it for confirmation.

• HDD Password Status

This field will show Set or Clear that means whether this notebook is

controlled by HDD Password or not.

• Password on Boot

If you set this field to Enabled, your computer will ask for the password

each time you boot your computer.

• Modem

Lets you specify Enabled or Disabled for activating or inactivating

Modem Device function when system is booting.