User's Manual

Notebook User Guide

6.3 Using the Advanced CMOS Setup

Phoenix BIOS Setup Utility

Main Advanced Security Boot Exit

Item Specific Help

NumLock [LockOn] Selects Power-on state

for NumLock

Embedded Share Memory [16MB]

Quiet Boot [Enabled]

Screen Expansion [Disabled]

Legacy USB Support [Enabled]

USB 2.0 [Enabled]

PXE OPROM [Disabled]

Wake on LAN from S5: [Enabled]

I/O Device Configuration

F1 Help

 

Select Item -/+ Change Values F9 Setup Defaults

Esc Exit --> Select Menu Enter Select Sub-Menu F10 Save and Exit

• Num-Lock

Lets you specify Enabled or Disabled for activating or inactivating Num-

Lock function when system is booting.

• Embedded Share Memory

Lets you specify the sharing memory size of the Video chip from DDR

SDRAM. The Default sharing size is 32MB. You should carefully specify

the value, since while the set value is too high, the memory size of your

software application will be reduced.

• Quiet Boot

Lets you specify the boot screen to Logo screen or POST screen by

choosing Disabled or Enabled, respectively.