User's Manual

Connecting to Peripherals 5
89
install the driver of peripheral device to connect with the IEEE 1394 port, for
details please refer to the manual that comes with your peripheral device.
+ Please make sure that the external IE E E 1394 HDD box you purchase on
local electronic store should provide external power adapter. There are
different types of IE E E 1394 HDD box and hard disk from different
manufactures, the power consumption has varied range. If the power of the
external IE E E 1394 HDD is supplied from the USB of this notebook, it may
not run properly.
5.4 Using the TV Port
Also found at the right of your computer is one TV port (s-video).
To display your computer screen on the TV, please connect the TV port of
this notebook to the Video Input of the TV set. You can press <Fn> + <F3>
key continually to switch between TFT, external monitor, TFT + external
monitor and TV only. Keep pressing the hot-key until you get the display to
external TV only.
Or you can setup the detail by operate the computer as follows.
1. Turn off your computer and plug one end of the s-video jack cable to the
end to the input video jack of your television set.