User's Manual
Table Of Contents
- 1.1Welcome
- 1.4Caring For Your Pocket PC
- 3.2Organizing Your Schedule with the Personal Information Manager
- 4.1Connecting to a PC
- Power cord sets for use in other countries must meet the requirements of those countries. For more information on power cord set requirements, contact your local authorized dealer, reseller, or service provider.
- The FCC requires the user to be notified that any changes or modifications made to this device that are not expressly approved by FIC may void the Reference authority to operate the equipment.
- The main battery is charged whenever mains power is connected, even if you continue to operate the Pocket PC. However, connecting to mains power with the Pocket PC turned off results in a much faster charge time.
- All programs, files, data and custom settings that you save are stored in RAM. This is a volatile storage medium requiring electrical power to remain operational. Therefore it is essential that the Pocket PC receives a continuous power supply, as any int
- _
- To remove the main battery it is necessary to move the battery release switch on your Pocket PC to the release position and remove the battery cover. When the battery release switch is in the release position the unit will automatically go into sleep mod
- _
- To prepare your Pocket PC for use, follow this simple procedure the first time you turn the device on. First, locate the hardware reset switch beneath the main battery. Unscrew the top of the stylus and use it to slide the hardware reset switch from left
- The command bar is found at the bottom of the screen. It displays menu names and available buttons, as well as the input panel button. These controls allow you to perform tasks in programs.
- _
- _
- _
- See Calendar Help and Inbox Help for more information on requesting meetings.
- _
- _
- To format existing text and to edit text, first s
- Pocket Excel contains a list of the files stored on your device. Tap a file in the list to open it. To delete, copy, and send files, tap and hold a file in the list, and then select the appropriate action from the pop-up menu.
- _
- _
- _
- You must install Microsoft ActiveSync on your PC before you can perform these functions.
- Making an infrared connection is a fast and convenient way of synching your Pocket PC without making a USB connection via the USB cable or USB cradle. Infrared ports are included on many mobile PCs, although they are less common on desktop systems.
- It is possible to download software from the Internet directly to your Pocket PC.
- Unless you mark the favorite link as a mobile favorite, only the link will be downloaded to your device, and you will need to connect to your ISP or network to view the content. For more information on synchronization, see ActiveSync Help on your compute
- The operating system and preloaded programs are stored in Flash ROM. Although this memory is not available for saving programs and files, it does not use up valuable RAM.
- _
- _
- To reset your Pocket PC, remove it from the USB cradle and make sure that the CF Expansion slot and SD card slot are empty. Locate the software reset button on the back of the device. Unscrew the end of the stylus and use it to push the button.
- If your Pocket PC fails to respond after being reset, you might have to restore the factory defaults. This is the software state that the device was in when you first started using it; the operating system and preloaded software stored in Flash ROM are p
- Possible reason: you are using power-intensive functions, such as playing music or running a CompactFlash card.
- Solution: stop using these functions, or operate your Pocket PC from mains power. To keep the battery fully charged, dock your Pocket PC in the cradle whenever it is not in use.
- The MIC requires the user to be notified that any changes or modifications made to this device that are not expressly approved by FIC may void the Reference authority to operate the equipment.
Why does my device turn on automatically when I insert or remove a Compact Flash
card?
This is a requirement for Pocket PC devices and is quite normal.
Why can’t I connect to my PC using ActiveSync via a USB interface?
Windows® NT and Windows® 95 do not support the USB standard, and so an ActiveSync
connection using USB will not work.
Why is ActiveSync invoked when I plug my serial cable into my device?
A: Make sure that you disable the “synchronization when cradled” option in the ActiveSync Tools
menu.
Why can’t I connect to my PC via ActiveSync using IR?
Make sure there is less than 30cm between devices and that the angle is no more than 30°.
Can I transfer data via IR to Palm OS-based devices?
Peacemaker is a cross platform, infrared transfer utility for handheld devices. More information can
be found at http://www.conduits.com/ce/peacemaker
Some games I have downloaded from the internet do not work very well on my Pocket
PC. Why is this?
Compatibility with software that does not fully conform to Pocket PC standards cannot be
guaranteed. To ensure compatibility, use only fully conforming software.
6.3.2 Problems and Solutions
My Pocket PC does not turn on when disconnected from mains power.
Possible reason: the battery is too low.
Solution: connect to the mains power supply and recharge the battery.
The battery runs down too quickly.
Possible reason: you are using power-intensive functions, such as playing music or running a
CompactFlash card.
Solution: stop using these functions, or operate your Pocket PC from mains power. To keep the
battery fully charged, dock your Pocket PC in the cradle whenever it is not in use.
My Pocket PC automatically shuts down or suspends.
1) Possible reason: the battery is too low and your Pocket PC performs a safety shutdown.
Your Pocket PC will automatically go into sleep mode when 95% of its charge is used up.
Solution: recharge the battery or use mains power.
2) Possible reason: auto-suspend is activated after a period of inactivity (the default setting is 3
minutes).
Solution: restart your Pocket PC. You can change the auto-suspend setting by tapping
“Settings”/”Power” on the start menu.
77