User's Manual
Table Of Contents
- 1.1Welcome
- 1.4Caring For Your Pocket PC
- 3.2Organizing Your Schedule with the Personal Information Manager
- 4.1Connecting to a PC
- Power cord sets for use in other countries must meet the requirements of those countries. For more information on power cord set requirements, contact your local authorized dealer, reseller, or service provider.
- The FCC requires the user to be notified that any changes or modifications made to this device that are not expressly approved by FIC may void the Reference authority to operate the equipment.
- The main battery is charged whenever mains power is connected, even if you continue to operate the Pocket PC. However, connecting to mains power with the Pocket PC turned off results in a much faster charge time.
- All programs, files, data and custom settings that you save are stored in RAM. This is a volatile storage medium requiring electrical power to remain operational. Therefore it is essential that the Pocket PC receives a continuous power supply, as any int
- _
- To remove the main battery it is necessary to move the battery release switch on your Pocket PC to the release position and remove the battery cover. When the battery release switch is in the release position the unit will automatically go into sleep mod
- _
- To prepare your Pocket PC for use, follow this simple procedure the first time you turn the device on. First, locate the hardware reset switch beneath the main battery. Unscrew the top of the stylus and use it to slide the hardware reset switch from left
- The command bar is found at the bottom of the screen. It displays menu names and available buttons, as well as the input panel button. These controls allow you to perform tasks in programs.
- _
- _
- _
- See Calendar Help and Inbox Help for more information on requesting meetings.
- _
- _
- To format existing text and to edit text, first s
- Pocket Excel contains a list of the files stored on your device. Tap a file in the list to open it. To delete, copy, and send files, tap and hold a file in the list, and then select the appropriate action from the pop-up menu.
- _
- _
- _
- You must install Microsoft ActiveSync on your PC before you can perform these functions.
- Making an infrared connection is a fast and convenient way of synching your Pocket PC without making a USB connection via the USB cable or USB cradle. Infrared ports are included on many mobile PCs, although they are less common on desktop systems.
- It is possible to download software from the Internet directly to your Pocket PC.
- Unless you mark the favorite link as a mobile favorite, only the link will be downloaded to your device, and you will need to connect to your ISP or network to view the content. For more information on synchronization, see ActiveSync Help on your compute
- The operating system and preloaded programs are stored in Flash ROM. Although this memory is not available for saving programs and files, it does not use up valuable RAM.
- _
- _
- To reset your Pocket PC, remove it from the USB cradle and make sure that the CF Expansion slot and SD card slot are empty. Locate the software reset button on the back of the device. Unscrew the end of the stylus and use it to push the button.
- If your Pocket PC fails to respond after being reset, you might have to restore the factory defaults. This is the software state that the device was in when you first started using it; the operating system and preloaded software stored in Flash ROM are p
- Possible reason: you are using power-intensive functions, such as playing music or running a CompactFlash card.
- Solution: stop using these functions, or operate your Pocket PC from mains power. To keep the battery fully charged, dock your Pocket PC in the cradle whenever it is not in use.
- The MIC requires the user to be notified that any changes or modifications made to this device that are not expressly approved by FIC may void the Reference authority to operate the equipment.
(a) Connect your Pocket PC to a wall outlet (see 2.3.2.1 Direct Mains Connection).
(b) Plug the USB cradle into a wall outlet and dock the device in the cradle (see
2.3.2.2 Mains Power Using the USB Cradle).
2. Allow at least 1 hour to charge your main battery before you turn on your Pocket PC. It is
recommended that you fully charge the battery before disconnecting the device from the
mains.
3. To prepare your Pocket PC for use, follow this simple procedure the first time you turn the
device on. First, locate the hardware reset switch beneath the main battery. Unscrew the
top of the stylus and use it to slide the hardware reset switch from left to right and then
put in the main battery. Wait 1 minute for the Welcome Wizard to be displayed, and
follow the on-screen instructions to calibrate the screen and set up the operating system.
Slide the Hardware Reset Switch from Left to Right the First Time You Use Your Pocket
PC. Please note that the reset switch should remain switched to the right when the Pocket
PC is in use to ensure that the internal backup battery is able to function.
2.4.2 Turning Your Pocket PC On
Your Pocket PC offers the convenience of “instant on,” enabling you to start work immediately
without waiting for lengthy initiation procedures to complete. To turn on your Pocket PC, press the
power button, the recorder button or one of the 4 programmable application buttons.
2.4.3 Turning Your Pocket PC Off
When you turn your Pocket PC off, the device does not shut down completely, but instead enters
standby mode. Although power consumption is extremely low, the system clock continues to run
and the RAM contents are maintained (see 2.3.4 Maintaining the Batteries for more information).
Furthermore, if you turn your Pocket PC on again within 4 hours, operation will resume where you
left off the last time you used the device.
To turn your Pocket PC off, press the power button on the front of the device.
18