User's Manual
Table Of Contents
- 1.1Welcome
- 1.4Caring For Your Pocket PC
- 3.2Organizing Your Schedule with the Personal Information Manager
- 4.1Connecting to a PC
- Power cord sets for use in other countries must meet the requirements of those countries. For more information on power cord set requirements, contact your local authorized dealer, reseller, or service provider.
- The FCC requires the user to be notified that any changes or modifications made to this device that are not expressly approved by FIC may void the Reference authority to operate the equipment.
- The main battery is charged whenever mains power is connected, even if you continue to operate the Pocket PC. However, connecting to mains power with the Pocket PC turned off results in a much faster charge time.
- All programs, files, data and custom settings that you save are stored in RAM. This is a volatile storage medium requiring electrical power to remain operational. Therefore it is essential that the Pocket PC receives a continuous power supply, as any int
- _
- To remove the main battery it is necessary to move the battery release switch on your Pocket PC to the release position and remove the battery cover. When the battery release switch is in the release position the unit will automatically go into sleep mod
- _
- To prepare your Pocket PC for use, follow this simple procedure the first time you turn the device on. First, locate the hardware reset switch beneath the main battery. Unscrew the top of the stylus and use it to slide the hardware reset switch from left
- The command bar is found at the bottom of the screen. It displays menu names and available buttons, as well as the input panel button. These controls allow you to perform tasks in programs.
- _
- _
- _
- See Calendar Help and Inbox Help for more information on requesting meetings.
- _
- _
- To format existing text and to edit text, first s
- Pocket Excel contains a list of the files stored on your device. Tap a file in the list to open it. To delete, copy, and send files, tap and hold a file in the list, and then select the appropriate action from the pop-up menu.
- _
- _
- _
- You must install Microsoft ActiveSync on your PC before you can perform these functions.
- Making an infrared connection is a fast and convenient way of synching your Pocket PC without making a USB connection via the USB cable or USB cradle. Infrared ports are included on many mobile PCs, although they are less common on desktop systems.
- It is possible to download software from the Internet directly to your Pocket PC.
- Unless you mark the favorite link as a mobile favorite, only the link will be downloaded to your device, and you will need to connect to your ISP or network to view the content. For more information on synchronization, see ActiveSync Help on your compute
- The operating system and preloaded programs are stored in Flash ROM. Although this memory is not available for saving programs and files, it does not use up valuable RAM.
- _
- _
- To reset your Pocket PC, remove it from the USB cradle and make sure that the CF Expansion slot and SD card slot are empty. Locate the software reset button on the back of the device. Unscrew the end of the stylus and use it to push the button.
- If your Pocket PC fails to respond after being reset, you might have to restore the factory defaults. This is the software state that the device was in when you first started using it; the operating system and preloaded software stored in Flash ROM are p
- Possible reason: you are using power-intensive functions, such as playing music or running a CompactFlash card.
- Solution: stop using these functions, or operate your Pocket PC from mains power. To keep the battery fully charged, dock your Pocket PC in the cradle whenever it is not in use.
- The MIC requires the user to be notified that any changes or modifications made to this device that are not expressly approved by FIC may void the Reference authority to operate the equipment.
When the main battery is removed the backup battery maintains power to memory for up to 30
minutes. If the main battery goes flat but is not removed, data and settings are maintained for 72
hours.
Your Pocket PC will automatically go into sleep mode when the main battery is removed and
cannot be woken up until the main battery has been replaced.
2.3.2 Using Mains Power
Connecting your Pocket PC to the mains power supply offers an alternative to using battery power.
As well as allowing unlimited use of the Pocket PC while you stay connected, mains power also
charges the battery, ensuring that the Pocket PC is ready for future mobile use.
2.3.2.1 Direct Mains Connection
The included AC adapter accepts 100V to 240V, enabling worldwide use with the appropriate local
connector. To charge the device using the AC adapter, connect the Y-cable to the
charging/communications port on the base of your Pocket PC, connect the adapter cord to the
adapter cord connector of the Y-cable and plug the adapter into a mains outlet. The power LED
shows flashing red while the battery is fast charging and continuous green light when the battery is
in trickle charging at least 80% charged.
Direct Connection to the Mains Power Supply
It is recommended that you fully charge the battery the first time you operate your Pocket PC. A full
charge of both main battery and backup battery will take approximately 4 hours.
2.3.2.2 Mains Power Using the USB Cradle
By keeping the USB cradle connected to the mains power supply, your Pocket PC can be charged
whenever it is docked. Spare batteries may also be charged on their own using the cradle.
15