User's Manual

Using Your Mini EPC 3

supports the flash memory card as SD, MMC, MS (Memory Stick),

and MS_Pro cards.



For a single moment, only one card can be inserted into the 4 in 1

card slot.

To insert and remove a Flash Memory Card:

For MMC and SD card, you should position the copper connector at

the bottom side. For Memory Stick card, you should position the

copper connector at the topside. All of these cards should be located

at the center of the slot in inserting.

Slot Card type Copper connector

4 in 1 SD (Secure Digital)

MMC (MultiMedia Card)

MS (Memory Stick)

MS_Pro

Bottom side

Top side

Only one correct side can be accepted for the 4 in 1 card slot. If you

cannot insert the card into the 4 in 1 slot or you had inserted the card

but it is not recognized by the mini EPC, please remove the card and

turn the card upside down and insert it again. To prevent the damage

made both on card and the slot, never force an entry into the slot with

incorrect side.