User's Manual

Getting Started 2
29
2 Getting Started
Your mini EPC is designed and pre-configured for easy setup and
use. This chapter describes the installation steps you should follow to
get the mini EPC up and running as quickly as possible. Contact your
dealer if they have pre-installed all the needed drivers to fully operate
your mini EPC or if there is the updation on the driver installation of
the mini EPC.
2.1 Connecting the AC Power Source
The AC adapter provides external power source to your mini EPC
and the AC adapter also has an auto-switching design that can
connect to any 100VAC ~ 240VAC power outlets.
To connect the power adapter:
1. Plug the AC power cord into the power socket of the AC power
adapter. And plug the other end of the AC power cord to a live
AC wall outlet.