User's Manual

Notebook User Guide
120
11. Install the battery back to the notebook as depicted in Chapter 2.2. "Using
the Battery Pack".
After upgrading the HDD, be sure to set the boot device as DVD/CD-RW
Combo drive and Primary Master as Auto on BIOS setup menu. Please refer to
Chapter 6 about the setting of BIOS setup menu. Then, boot the system by
using WinXP CD-ROM and the system will detect the hard disk automatically
and prompt you how to format the new disk.
 Please tighten the screws located at each side of the hard disk before
operating the hard disk. Any vibration may cause damage for the
running hard disk.
 Please contact dealer or certified technician for changing the hard disk
drive. T he damage of changing H DD resulting from users may not be
under warranty