User Manual

Mini-note User Guide

System Upgrade

This section provides some steps in doing system upgrade for your Mini-note.

The upgrade procedures include the following:

7.1 Hard Disk Upgrade

Your Mini-note computer offers one 1.8" format, 8 mm height hard disk. If

the volume does not fit your need or it is crashed, you can upgrade it by

replacing with new hard disk. Please do the following steps to change it.

1. Remove the screw and open the cover by lifting its upper side cover.

2. Take out the hard disk from the compartment by finger carefully

3. Remove the connector from the hard disk gently.

4. Remove the crane screws located at each side of the hard disk.

5. Rotate and tighten the crane screws to the new hard disk.

6. Attach the connector to the new hard disk precisely.

7. Place the hard disk back to the compartment.