User Manual

Mini-note User Guide

6.2.1 INTERNAL HDD SUB-MENU

Phoenix BIOS Setup Utility

Main

IDE Channel 0 Master [TOSHIBA MK6028GAL- Item Specific Help

Type: [Auto] User = you enter

LBA Format

parameters of hard-disk drive

Total Sector: 117210240 installed at this connection.

Maximum Capacity: 60012 MB Auto = autotypes hard-disk

drive installed here.

Multi-Sector Transfers: [16 Sectors] CD-ROM = a CD-ROM

LBA Mode Control: [Enabled] drive is installed here.

32 Bit I/O: [Disabled] ATAPI Removable =

Transfer Mode: [FPIO 4 / DMA 2] removable disk drive is

Ultra DMA Mode: [Mode 5] installed here.

SMART Monitoring: Enabled

F1 Help

Ç È

Select Item F5/F6 Change Values F9 Setup Defaults

Esc Exit Å--> Select Menu Enter Select Sub-Menu F10 Save and Exit

Use the Type field to select the drive type installed. You can select different

drive types as CD-ROM, User, Auto or None by pressing <Space> bar. Set

this option to Auto so your Mini-note will automatically detect the drive type

during power on. Set this option to None when your Mini-note is not installed

any devices. Press <Esc> to return to the Main Menu.