User's Manual

Additional Information
5. Why do I see corrupted title on LCD display
during playback?
Guidelines for safe and efficient Use
 BTH300 currently only supports English?? display.
NOTE: Read this information before using your BTH300
Bluetooth MP3 Headset.
6. Why is my BTH300 switched off automatically?
 Check if the battery is too low. Insert a new one if
necessary.
Changes or modifications to this Bluetooth MP3 Headset
not expressly approved by FIC may void the user’s
authority to operate the equipment.
 Check if you have configured sleep time.
 Check if BTH300 is connected to your computer
with the USB cable. BTH300 is designed to switch
off automatically when connected to your
computer and can only be switched on when not
connected.
Please check for any exceptions, due to national
requirements or limitations, in usage of Bluetooth
equipment before using this product.
Product Care
7. Why don’t I see the phone number or the name
of the caller?
 Do not expose your product to liquid or moisture or
humidity.
 Check if your phone and subscription supports
Calling Line Identification.
 Do not expose your product to lit candles, cigarettes,
or cigars, or to open flame, etc.
8. Why is my computer not able to connect
wirelessly to a Bluetooth device?
 Do not drop, throw or try to bend the product as
rough treatment could damage it.
 Check if BTH300 and Bluetooth device your
computer attempts to connect are within optimal
range.
 Do not use any other accessories than FIC originals
intended for use with this product. Use of
non-original accessories may result in loss of
performance, damage to the product, fire, electric
shock or injury. The warranty does not cover
product failures which have been caused by use of
non-original accessories.
 Check if your Bluetooth device is on.
 Check if BTH300 is properly connected to your
computer using the USB cable.
 Check if BTW software is configured properly to
work with the Bluetooth device.
- 12 -
 Do not attempt to disassemble your product. The
product does not contain consumer serviceable or
replaceable compenents. Only FIC service partners
should perform service.
 Do not keep the product in a nd area prone to dust
and dirt. Only use a soft damp cloth to clean your
product.
- 13 -
 If you will not be using the product for a while, store
it in a place that is dry, free from damp, dust and
extreme temperatures. Remove the battery.
Radio Frequency Exposure
Your BTH300 is a radio transmitter and receiver. When
in operation, it communicates with a Bluetooth equipped
mobile device by receiving and transmitting radio
frequency (RF) electromagnetic fields (microwave) in
the frequency range 2400 to 2500 MHz. The output
power of the radio transmitter is low, 0.001 watt.
Your BTH300 is designed to operate in compliance with
the RF exposure guidelines and limits set by national
authorities and international health agencies when used
with any compatible mobile phone.
Driving
Check the laws and regulations on the use of mobile
phone, handsfree equipment, and music players in the
areas where you drive.
Always give full attention to driving and pull of the road
and park before making or answering a call if driving
conditions so require.
RF energy may affect some electronic systems in motor
vehicles such as car stereo, safety equipment, etc.
Check with your vehicle manufacturer’s representative
to be sure that your mobile phone or BTH300 will not
affect the electreonic systems in your vehicle.
Electronic Equipment
Most modern electronic equipment is shielded from RF
energy. However, certain electronic equipment is not,
therefore:
Do not use your BTH300 near medical equipment
without requesting permission. If you are using any
personal medical devices, e.g. a pacemaker or a hearing
aid, please read in your mobile phone’s user manual for
furthur information.
Aircraft
Turn your BTH300 OFF before boarding any aircraft.
Too prevent inteference with communication systems,
you must not use your BTH300 while the plane is in the
air.
Manufactured by FIC