User Manual

AQUAPAD+ System User’ s Manual
16
Setting up the charging cradle
To place the AQUAPAD+ in the cradle for charging:
?? Locate the connector on the bottom of the AQUAPAD+. A rubberized cover protects
this connector.
?? Remove the rubberized cover to display the connector as shown in [Figure. 3.10].
?? Place the AQUAPAD+ in the cradle with the connectors properly aligned as shown in
[Figure. 3.11].
Figure 3.10 Rubberized connector cover
Figure 3.11 AQUAPAD+ with the cradle