Installation Guide

Catalog No. FAP130-2039-02 Printed U.S.A Form Disconnect Switch Kit 8/23/2011 pg. 2
Figure 1 – Package Contents
GENERAL
The Subbase Disconnect Switch Accessory consists of a single-throw double-pole switch assembly designed to
interface to a receptacle kit in an electrical subbase. See Fig. 2. This accessory provides a power disconnect for
the unit when required by NEC (National Electrical Code) or local codes.
Figure 2 – Non-Electric Subbase
INSTALLATION
PACKAGE CONTENTS
FIELD SUPPLIED MATERIAL REQUIRED
ITEMS
QUANTITY
ITEMS
DPST Switch
1
Subbase Receptacle Kit
Switch Junction Box
1
Wire
Switch
Cover (inc Screws)
1
Wire Nuts
3" Interconnecting Conduit Nipple
1
Grounding Screw or Clip
Attachment Screws (Junction Box)
4
Attachment Screws (Switch) 2
Conduit Nuts
2