User's Manual

ManualsBrandsFirst Alert ManualsSecurity SystemsFirst Alert Smartbridge 8 Channel

Smartbridge Mobile Software V2.3.7

iPhone / iPad

1. Launch the Apple App store and search for “Smartbridge”.

2. Once the app is downloaded and installed, launch the app and enter your SmartBridge ID

number. Under the advanced tab you must enter the User Name and Password you set in the

DVR under the “Network User” accounts.

Note: Default Username is “abc” and default password is “123”.

3. You will now be logged in and be able to view your camera(s). Initially, the app will launch in

Quad channel mode, as shown below. Please note that the view can be switched to portrait or

landscape view by tilting the Apple device itself.

Summary of content (4 pages)

PAGE 1
Smartbridge Mobile Software V2.3.7 iPhone / iPad 1. Launch the Apple App store and search for “Smartbridge”. 2. Once the app is downloaded and installed, launch the app and enter your SmartBridge ID number. Under the advanced tab you must enter the User Name and Password you set in the DVR under the “Network User” accounts. Note: Default Username is “abc” and default password is “123”. 3. You will now be logged in and be able to view your camera(s).
PAGE 2
4. Press the button to switch the quad View mode. Here the different camera channels can be cycled through by swiping to the left or right to view additional cameras installed. Double tap one channel to place that channel in full screen mode. Double tap again to return the quad view mode. 5. Press the arrow key button in quad view mode and the app will exit quad view mode and return to the main screen.
PAGE 3
6. Press the button to enter into sequencing mode. Swipe your finger from right to left to toggle between channels. Press the arrow key button in sequencing view mode and the app will exit sequencing view mode and return to the main screen. 7. Pressing the “Left pointed” arrow on the right side of the screen (in landscape view) will bring up the “Additional settings and options” menu for additional information or functionality.
PAGE 4
Link None: Select to disconnect all connections to the DVR Image View: Select to view all saved snapshots Version: Gives the version number of the App Sequence: Allows for sequencing of the Camera channels PTZ: Allows control panel for PTZ cameras Setting: Change your snapshot capture burst X: Tap the “X” in the middle to exit the settings. 8. PTZ Control in Landscape view Swipe finger up here Swipe finger as shown in the picture above to obtain PTZ controls in Landscape view.