User's Manual

Page 39

Web service - currently not function

Mobile service - to enable mobile browsing

Port - this is the web port which should always be at 80

Quality- selects the quality of the streaming video

Channel - select channel you would like to apply settings to

Device ID - shows your DVR ID number

FPS - frames per second. The higher the fps, the better

Set time- set date and time

Channel –select channel of the PTZ

Ch name – give the channel number a name

Main – quality of camera -

CIF or D1 on 4/8 channel

Standard/Net Mode on 16 channel

Minor- low quality of camera-

Select QCIF, CIF or None.

PAL/NTSC –default is NTSC

Audio- turns audio on or off (only works if a mic is installed)

Position - Changes the position of the date and time and ch. No.

Select Left down, Left up, or None.

Main size- chose the size of the ﬁle for streaming.

Size is by MB/H(megabytes per hour)

Minor size- chose the lowest number of MB/H

Minor FPS - Choose the frames per seconded – higher the better

PTZ

Address: Address of the PTZ camera

Protocol: Choose the protocol of the PTZ

NOTE: ONLY compatible with pelco-D

Band Rate chose the band rate of the PTZ

Record task - sets your scheduling recording

REMOTE CONFIGURATION

CAMERA SETTINGS