Quick Start Guide

POWER SPLITTER
DVR QUICK START GUIDE
REMOTE CONTROL &
USB 2.0 MOUSE
POWER SUPPLY*
DVR & CAMERAS
ETHERNET CABLE
Step 3: Connecting the Mouse and Ethernet Cable
Connect the USB mouse to the bottom USB slot on the back
Connect the Ethernet cable to the back of the DVR labeled either NET or RJ45
Connect the other end of the cable directly to your router, modem or high speed
internet connection input
Note: USB mouse and ethernet cable input locations may vary model to model.
1
3
ENGLISH
BACK of DVR
Step 1: Connect the DVR to your Monitor or TV
(Monitor Option)
Connect a VGA cord (not included) from your monitor to the VGA Output port on the back of your DVR
(TV Option)
Connect the end of the BNC-RCA adapter (not included) “BNC SIDE ONLY” cable to the back of the
DVR labeled “Video Output”
Connect the BNC-RCA (RCA SIDE ONLY) cable to an open video (yellow RCA) input on your TV/Monitor
(note the input name or number)
Turn on your TV/Monitor and select the appropriate input (noted above)
1
1
2
3
1
2
3
VGA
1
1
2
2
Product Contents
STICKERS
Remote Software
Installation Disc
3
2
2
3
1
1
(Attach for each camera)
(Power Splitter)
Go to firstalert.com to find complete instruction manual for your First Alert DVR.
© 2013 BRK Brands, Inc. All rights reserved. Distributed by BRK Brands, Inc., Aurora, Illinois
60504. BRK Brands, Inc. is a subsidiary of Jarden Corporation (NYSE: JAH). First Alert® is a
registered trademark of the First Alert Trust. Due to continuing product development, the product
inside the packaging may look slightly different than the one on the package. To obtain warranty
service, contact the Consumer Affairs Division at 1-800-323-9005, Monday through Friday, 7:30
a.m. - 5 p.m., Central Standard Time.
www.firstalert.com
REMOTE ACCESS
REMOTE ACCESS
VGA Input or BNC-RCA Input TV/Monitor
WARNING
PROTECTED BY
THESE PREMISES ARE UNDER
24 HOUR VIDEO SURVEILLANCE
Power
IR
Rec
MENU
1 2 3 4
1 2 3 4
ESC
DVR
Step 2: Connecting the Cameras*
Connect the BNC & power from camera with BNC power cable using the side labeled
"Camera Side”
Using other side of BNC power cable labeled DVR side only, connect BNC to BNC
video input on DVR
Connect camera power cable to one of the multi-splitter ends
* 16 Channel DVR systems contain separate power supplies for cameras and DVR
* 16 Channel DVR systems contain separate power supplies for cameras and DVR
Step 3: Powering the DVR*
8 Channel:
Connect the power supply to the multi-splitter end
Connect the DVR to one of the multi-splitter ends
16 Channel:
Connect the camera power supply to the multi-splitter end
Connect the DVR power supply to the DVR
Obtain unique system ID from DVR
• Right click and ID will be displayed
PC Connect Setup
• Insert SmartBridge Remote Software Installation Disc into your computer or laptop
• Install Software
• Open Program
• Enter Unique System ID into the Device ID prompt,
Password is set to a default 123
• Select “Login” to access your system
Easy Setup
1
1
2
Smartphone and Tablet Setup
• Download SmartBridge Mobile App
• Open App and enter Unique System ID into the Device ID prompt
• Select “Login” to access your system
3
2
3
1
2
1
2
2
1