User's Manual

Web Browser Operation
Model 8800 User's Manual
64
There are four subsections in the Server menu:
Device Configuration: Enter the device name and choose the Signal Standard
(NTSC/PAL/SECAM). Values for Channel Count, Alarm Input, Device Serial
Number, Device Type, Hard Disk Count, and Alarm Output are not changeable and
provide reference information about the DVR.
Net Configuration: Enter network configuration parameters. Enable PPPoE has
two options: Enable and Disable. If you enable this function, the related fields
(PPPoE Address, PPPoE User Name, and PPPoE Password) are active. Checking
the Domain Name (DDNS) option activates related fields: Domain Name (drop-
down window with a list of available DDNS services), User Name and Password.
HTTP Port and Mobile Port are changeable and their default values are 80 and
7050 respectively.
Manage Host: Check Enable Host to activate related fields: Host IP, Manage Host
Port, and Register Interval.
Version Info: Non-changeable information fields: Software, Hardware, and DSP
Software versions.
Click CONFIRM to save changes and exit. Click CANCEL to exit without saving changes.
Click RESTORE DEFAULT to reset values to parameters before changes were made.
Click SAVE PARAMETERS to save change. Click EXIT to close the window without
saving changes.