Installation Guide

CAT.
7010B
ARCHITECTURAL AND ENGINEERING SPEC
TECHNICAL SPECS
SHIPPING SPECS
INSTALLATION OF ALARM
The smoke alarm shall be a BRK Model 7010B and shall provide at a minimum the
following features and functions:
1. A photoelectric smoke sensing chamber.
2. The unit shall be capable of self restoring.
3. A fully screened sensing chamber to resist entry of small insects thereby reducing
the probability of unwanted alarms.
4. Powered by 120V AC, 60Hz and have a monitored 9V battery backup and a solid
state piezo horn rated at 85dB at 10 ft.
5. A visual LED power-on indicator to confirm unit is receiving power or is in alarm.
6. A full function test button. The test button should check all alarm functions by
stimulating the chamber to simulate a smoke condition, causing the unit to alarm.
7. Latching & silence features: Alarm Latch to easily identify initiating alarm after
alarm condition has subsided. Silence feature - Temporarily silence unwanted
nuisance alarms.
8. Two Locking features - tamper resistant locking pins that lock battery drawer and/
or alarm to mounting bracket.
9. The unit shall be capable of operating between 40°F (4°C) and 100°F (38°C) and
relative humidity between 10% and 95%.
10. The unit shall have a gasketless base for easy installation and be capable of
keeping alarm secure over a wide rotation range to allow for true alarm alignment.
11. The unit shall have a plug in connector and be capable of interconnection of up to
18 alarms, 12 of which can be smoke alarms.
12. The unit shall at a minimum meet the requirements of UL217, CSFM, NFPA 72,
NFPA 101, ICC.
Alarm Dimensions: 5.0”Dia. x 2.1”H
Weight: 8.4 oz
Operating Voltage: 120V AC 60Hz w/ 9V battery backup
Temperature Range: 40°F (4°C) to 100°F (38°C)
Humidity Range: 10% to 95% relative humidity (RH)
Audio Alarm: 85dB at 10 feet
Test/Silence: Electronically simulates smoke condition, causing the
unit to alarm. Press and hold test/silence button.
Alarm Reset: Automatic when smoke clears
Interconnections: Up to 18 units of First Alert or BRK Smoke, CO and Heat
Alarms. Maximum of 12 smoke alarms. See user’s
manual for details.
Smoke Sensor: Photoelectric
Indicator Lights/Sounds:
AC Power: Constant Green LED
DC Power: Intermittent Red LED
Local Alarm: Red LED flashes rapidly
Latching Alarm: Red LED flashes once per second for 3 seconds after
local alarm. Pattern repeats approximately every 45 secs.
Remote Alarm: Audio alarm and Red LED out.
Listing: Listed to UL217 Standard
Individual Carton Dimensions 5.13”L x 2.38”W x 5.13”H
Weight 0.55 lbs.
Cube 0.04 ft3
UPC 0 29054 11201 9
Master Carton Dimensions 10.75”L x 7.88”W x 11.06”H
Master Pack 12
Weight 7.1 lbs.
Cube: 0.54 ft3
I2of5: 100 29054 11201 6
Pallet Information
Cases per Layer 22
Number of Layers: 4
Cases per Pallet: 88
Units per Pallet: 1,056
Cube: 54.0 ft3
Weight: 678 lbs.
©2015 BRK Brands, Inc. a Jarden Corporation
Company (NYSE: JAH)
3901 Liberty Street Road
Aurora, IL 60504-8122
All rights reserved
First Alert is a registered trademark of the First Alert Trust
BRK is a registered trademark of BRK Brands, Inc.
CM3250
brkelectronics.com
Installation of this smoke alarm must conform to all local
electrical codes and Article 760 of the National Electrical Code
(NFPA 70) and NFPA 72. Interconnected units must meet the
following requirements: Total length of wire interconnecting
units should be less than 1000 feet, be #18 gauge or larger
and be rated at least 300V. It is recommended that all units
be on the same fuse or circuit breaker. If local codes do not
permit, be sure the neutral wire is common to both phases.
THE PARTS OF THIS ALARM
MOUNTING
BRACKET
TOP VIEW SIDE VIEW
5.0”
2.1”
2
8
1
7
6
5
4
3
2
678
43 1
5 2
A
B
}
}
43 15
1. Mounting bracket
2. Mounting Slots
3. Locking Pins
4. Hot (Black) AC Wire
5. Nuetral (White) AC Wire
6. Interconnect (Orange) Wire
7. Pull out Battery Drawer
8. Quick-Connect Plug
1. Smoke Alarm
2. Ceiling or Wall
3. Power Connector
4. Wire Nut
5. Junction Box
6. Neutral Wire (White)
7. Interconnect Wire (Orange)
8. Hot Wire (Black)
A. Unswitched 120VAC 60 Hz source
B. To additional units; Maximum = 18 total
(Maximum 12 Smoke Alarms)