MSDS

15. REGULATORY INFORMATION

EU Classification: This preparation is not classified as dangerous according to Directive 1999/45/EC.

Nuisance dust limit: OSHA TWA: 15 mg/m

ACGIH TLV-TWA: 10 mg/m

EINECS Status: All components are included in EINECS inventories or are exempt from

listing.

EPA TSCA Status All components are included in TSCA inventories or are exempt from listing.

Canadian DSL (Domestic Substances List): All components are included in the DSL or are exempt from listing.

Environmental restrictions: None are known.

Restrictions on Marketing and Use: None are known.

Refer to any other national measures that may be relevant.

16. OTHER INFORMATION

Format is from directive 2001/58/EC.

EINECS data is from http://ecb.jrc.it/existing-chemicals/

Data used to compile the data sheet is from Ansul Material Safety Data Sheet, February, 2002.

The EU Classification has been changed in accordance with Directive 1999/45/EC and information in the EINECS ESIS

files (Existing Substances Information System).

Toxicological information added from the EINECS ESIS (Existing Substances Information System).

A rating under WHMIS has been added, following the Canadian guidelines.

17. DISCLAIMER

THE ABOVE INFORMATION IS BELIEVED TO BE CORRECT, BUT DOES NOT PURPORT TO BE ALL INCLUSIVE AND

SHALL BE USED ONLY AS A GUIDE. ANSUL SHALL NOT BE HELD LIABLE FOR ANY DAMAGE RESULTING FROM

HANDLING OR FROM CONTACT WITH THE ABOVE PRODUCT.

(WHMIS) CANADIAN WORKPLACE HAZARDOUS MATERIAL

IDENTIFICATION SYSTEM RATINGS:

This product is NOT controlled under the Canadian WHMIS.

(HMIS) HAZARDOUS MATERIAL IDENTIFICATION SYSTEM RATINGS:

HEALTH: 0 4. Severe Hazard

___

FLAMMABILITY: 0 3. Serious Hazard

___

REACTIVITY: 1 2. Moderate Hazard

___

1. Slight Hazard

0. Minimal Hazard

Page 5PLUS-FIFTY C (Continued)

ANSUL is a trademark of Tyco International Ltd. or its affiliates.

MSDS available at http://www.ansul.com